Exam code: 4XPH1
1/710Still learning
Know0
Was this flashcard helpful?
Define magnetic force.
The magnetic force is the force of attraction or repulsion that acts between two magnetic poles.
State the law of magnetism.
Two like poles repel (N–N or S–S); two opposite poles attract (N–S).
Define a magnetically soft material.
A magnetically soft material (e.g. iron) is easy to magnetise and easily loses its magnetism — it is only temporarily magnetised.
Define a magnetically hard material.
A magnetically hard material (e.g. steel) is difficult to magnetise and does not easily lose its magnetism — it stays permanently magnetised.
Why are permanent magnets made from magnetically hard materials such as steel?
Hard materials are difficult to magnetise, but once magnetised they do not easily lose their magnetism, so the magnet stays permanent.
Why are electromagnets made from magnetically soft materials such as iron?
Soft materials are easy to magnetise and easily lose their magnetism, so the electromagnet can be switched on and off (magnetic or non-magnetic) as needed.
Two ______ poles repel, while two ______ poles attract.
Two like poles repel, while two opposite poles attract.
True or False?
Steel is an example of a magnetically soft material.
False.
Steel is magnetically hard — it is difficult to magnetise and does not easily lose its magnetism. Iron is the magnetically soft material.
Define a magnetic field.
A magnetic field is the region around a magnet where a force acts on another magnet or on a magnetic material (such as iron, steel, cobalt or nickel).
Define a uniform magnetic field.
A uniform magnetic field has the same strength and direction at every point, shown by field lines that are straight, parallel and equally spaced.
In which direction do magnetic field lines point?
From the north pole to the south pole, shown by an arrow midway along the line.
How does the spacing of magnetic field lines show the strength of a magnetic field?
Field lines close together show a strong field; field lines far apart show a weak field.
How can a uniform magnetic field be produced using two bar magnets?
Hold opposite poles (north and south) of the two magnets a few centimetres apart — a uniform field is produced in the gap between them.
Two magnetic field lines must ______ touch or cross each other.
Two magnetic field lines must never touch or cross each other.
True or False?
Magnetic field lines around a bar magnet are closest together midway between the poles.
False.
Field lines are closest together at the poles, where the field is strongest, and spread further apart (weaker) further from the magnet.
Define a magnetic material.
A magnetic material is a material that is attracted to a magnet, but is not necessarily a magnet itself, for example iron, cobalt, nickel or steel.
Define a permanent magnet.
A permanent magnet produces its own magnetic field and does not lose its magnetism.
Define induced magnetism.
Induced magnetism is the temporary magnetism produced in a magnetic material when it is placed in a magnetic field; the material loses most or all of its magnetism quickly once removed from the field.
How can you test whether an unknown sample is itself a magnet, rather than just a magnetic material?
Bring it close to a known magnet. If it is repelled, it is a magnet. If it can only be attracted (never repelled), it is a magnetic material but not a magnet.
When magnetism is induced in a magnetic material near a magnet's north pole, which pole forms at the end of the material closest to the magnet?
A south pole forms at the closest end, since the induced pole is always opposite to the pole nearest to it, so the material is attracted.
Steel is an alloy which contains ______, so it is also magnetic.
Steel is an alloy which contains iron, so it is also magnetic.
True or False?
A piece of nickel will always be attracted to a magnet, regardless of which pole is held close to it.
True.
Magnetic materials such as nickel are attracted to a magnet regardless of pole, because the induced pole nearest the magnet is always the opposite pole.
What is the aim of Core Practical 12?
To investigate the magnetic field pattern for a permanent bar magnet, and between two bar magnets.
What piece of equipment is used to show the direction of a magnetic field at a point in this practical?
A plotting compass.
Describe how a plotting compass is used to plot one magnetic field line for a bar magnet.
Place the compass next to a dot so its needle points away from the dot, then mark a new dot at the far end of the needle. Repeat this to build a chain of dots from one end of the magnet to the other, then join the dots with a smooth curve.
In this practical, how are two bar magnets arranged to compare their magnetic field patterns?
Placed 5 cm apart, first with the same poles facing each other, then with opposite poles facing each other.
State two precautions that should be taken to improve accuracy in this practical.
Any two from: use a sharp pencil for clear, accurate field lines; read the compass from directly above (not at an angle); allow the compass to settle for a couple of seconds before taking a reading.
After removing the compass, the chain of dots is linked using a ______ to form the magnetic field line.
After removing the compass, the chain of dots is linked using a smooth curve to form the magnetic field line.
True or False?
In this practical, the compass should be read from an angle to make the marker easier to see.
False.
The compass should be read from directly above, not at an angle, to avoid parallax error and take an accurate reading.
Define the right-hand thumb rule.
A rule used to find the direction of the magnetic field around a current-carrying wire: point the right thumb in the direction of current flow, and the curled fingers show the direction of the magnetic field.
What shape is the magnetic field around a straight current-carrying wire?
A series of concentric circles around the wire, showing that the field has no poles.
What happens to the magnetic field around a wire if the direction of the current is reversed?
The direction of the magnetic field is also reversed.
What happens to the magnetic field around a wire if no current is flowing?
There is no magnetic field.
State two factors that affect the strength of the magnetic field around a current-carrying wire.
The size of the current — a larger current gives a stronger field — and the distance from the wire — the field weakens as distance increases.
Increasing the current in a wire causes its magnetic field lines to become ______ together.
Increasing the current in a wire causes its magnetic field lines to become closer together.
True or False?
The magnetic field around a current-carrying wire is strongest furthest from the wire.
False.
The field is strongest closest to the wire and becomes weaker as the distance from the wire increases.
Define the motor effect.
The motor effect occurs when a current-carrying wire is placed in a magnetic field and experiences a force, caused by the interaction of the wire's own magnetic field with the external magnetic field.
What force acts on a current-carrying wire in a magnetic field if no current is flowing through it?
No force acts on the wire.
In a simple d.c. motor, what two components keep the rotating coil connected to the circuit?
The split ring and the carbon brushes.
In a loudspeaker, the oscillating coil makes the speaker cone oscillate, which makes the air oscillate, creating ______.
In a loudspeaker, the oscillating coil makes the speaker cone oscillate, which makes the air oscillate, creating sound waves.
True or False?
A loudspeaker's coil oscillates because a direct current flows through it.
False.
A loudspeaker uses an alternating current, which produces a constantly changing magnetic field; this interacts with the permanent magnet's field to make the coil oscillate.
State three ways of increasing the force on a current-carrying wire in a magnetic field.
Increasing the current; using stronger magnets; placing the wire at 90° to the magnetic field lines.
What force acts on a current-carrying wire placed parallel to the magnetic field lines?
No force, since there is no interaction between the two magnetic fields.
Define Fleming's left-hand rule.
A rule used to determine the direction of the force (thrust) on a current-carrying wire in a magnetic field, given the directions of the current and the magnetic field.
In Fleming's left-hand rule, what does the First finger represent?
The direction of the magnetic Field.
In Fleming's left-hand rule, what does the seCond finger represent?
The direction of the Current.
In Fleming's left-hand rule, what does the thumb represent?
The direction of the thrust (force).
In Fleming's left-hand rule, the force, field and current are all ______ to each other.
In Fleming's left-hand rule, the force, field and current are all perpendicular to each other.
True or False?
In Fleming's left-hand rule, the magnetic field points from south to north.
False.
The magnetic field points from north to south.
Why is it useful to remember that force, field and current are mutually perpendicular in Fleming's left-hand rule?
It means the force may act into or out of the page, not only up, down, left or right within the plane of the diagram.
Define electromagnet.
A coil of wire wound around a soft iron core, used to produce a magnetic field when a current flows through it.
How can the magnetic field of an electromagnet be reversed?
By reversing the direction of the current.
State two ways to increase the strength of an electromagnet's magnetic field.
Increasing the current in the coil; adding more turns to the coil.
Winding a wire into a ______ strengthens its magnetic field by concentrating the field lines.
Winding a wire into a coil strengthens its magnetic field by concentrating the field lines.
True or False?
Like a bar magnet, an electromagnet is always magnetic.
False.
An electromagnet is only magnetic while current flows through it; a bar magnet is a permanent magnet.
What shape is the magnetic field produced by an electromagnet?
The same shape as the magnetic field around a bar magnet.
Define solenoid.
A wire wound into a coil, producing a magnetic field similar in shape to that of a bar magnet.
What shape are the magnetic field lines around a straight current-carrying wire?
Concentric circles, centred on the wire.
What rule is used to find the direction of the magnetic field around a straight current-carrying wire?
The right-hand thumb rule.
The magnetic field around a straight wire is ______ closest to the wire, and gets weaker with distance.
The magnetic field around a straight wire is strongest closest to the wire, and gets weaker with distance.
How does adding an iron core affect the magnetic field of a solenoid?
The iron core becomes an induced magnet, producing a much stronger overall magnetic field.
True or False?
Viewed from the end, a solenoid's pole is a north pole if the current flows clockwise.
False.
Clockwise current viewed from the end gives a south pole; anticlockwise current gives a north pole.
State three ways to increase the strength of a solenoid's magnetic field.
Increasing the current; increasing the number of turns; adding an iron core.
Inside and outside a solenoid, what happens to the magnetic fields produced by the individual turns of the coil?
Inside, the fields add together to form a strong, uniform field; outside, they cancel to give a weaker field.
Define the magnetic force on a charge.
When a charged particle travels through a magnetic field, the field exerts a force on the particle, causing it to deflect.
In what direction does the force on a moving charged particle act, relative to its direction of travel and the magnetic field?
At 90 degrees (perpendicular) to both the direction of travel and the magnetic field lines.
What rule can be used to determine the direction of the force on a charged particle in a magnetic field?
Fleming's left-hand rule.
A charged particle travelling ______ to the field lines experiences the maximum force.
A charged particle travelling perpendicular to the field lines experiences the maximum force.
True or False?
A charged particle travelling parallel to a magnetic field's lines experiences the maximum force.
False.
It experiences no force when travelling parallel to the field lines; the maximum force occurs when travelling perpendicular to them.
Why does the direction of conventional current used in Fleming's left-hand rule differ from the direction electrons actually travel?
Conventional current flows from positive to negative, which is the opposite direction to the flow of (negatively charged) electrons.
What force acts on a charged particle travelling at an angle to the magnetic field lines (neither parallel nor perpendicular)?
A small force — less than the maximum.
By signing up you agree to our Terms and Privacy Policy