Rotations (Cambridge (CIE) IGCSE Maths: Extended): Revision Note
Exam code: 0580 & 0980
Rotations
What is a rotation?
A rotation turns a shape around a point
This is called the centre of rotation
The rotated image is the same size as the original image
It will have a new position and orientation
If the centre is a point on the original shape then that point is not changed by the rotation
It is called an invariant point

How do I rotate a shape?
STEP 1
Place the tracing paper over page and draw over the original object
STEP 2
Place the point of your pencil on the centre of rotation
STEP 3
Rotate the tracing paper by the given angle in the given direction
The angle will be 90°, 180° or 270°
STEP 4
Carefully draw the image onto the coordinate grid in the position shown by the tracing paper
Examiner Tips and Tricks
When you first go into the exam room, make sure there is some tracing paper on your desk ready for you. If there isn't ask for some before the exam begins.
Draw an arrow facing up on your tracing paper.
The arrow will be facing left or right when you have turned 90° or 270°.
The arrow will be facing down when you have turned 180°.
Double-check that you have copied the rotated image into the correct position.
Put the tracing paper over the original object and rotate it again to see that it lines up with your image.
Worked Example
(a) On the grid below rotate shape A by 90° anti-clockwise about the point (0, 2).
Label your answer A'.

Answer:
Using tracing paper, draw over the original object and mark one vertex.
Mark on the centre of rotation.
Draw an arrow pointing vertically upwards on the paper.

With your pencil fixed on the point of rotation, rotate the tracing paper 90o anti-clockwise, the arrow that you drew should now be pointing left.
Make a mental note of the new coordinates of the vertex that you marked on your tracing paper.
Draw the new position of this vertex onto the grid.

Repeat this process for the other two vertices on the triangle.
Connect the vertices together to draw the rotated image.

How do I describe a rotation?
To describe a rotation, you must:
State that the transformation is a rotation
State the centre of rotation
State the angle of rotation
This will be 90°, 180° or 270°
State the direction of rotation
Clockwise or anti-clockwise
A direction is not required if the angle is 180°
90° clockwise is the same as 270° anti-clockwise
To find the centre of rotation:
If the rotation is 90° or 270°
Use tracing paper and start on the original shape
Try a point as the centre and rotate the original shape
If the rotated shape matches the image then that point is the centre
Otherwise keep picking points until one works
If the rotation is 180°
Draw lines connecting each vertex on the original shape with the corresponding vertices on the image
These lines will intersect at the centre of rotation
How do I reverse a rotation?
If a shape has been rotated to a new position, you can perform a single transformation to return the shape to its original position
A rotation can be reversed by simply reversing the direction of rotation
The angle of rotation is the same
The centre of rotation is the same
For a shape rotated by 90º in a clockwise direction about the point (0, 3)
The reverse transformation is
a rotation of 90º
in an anti-clockwise direction
about the point (0, 3)
Worked Example
Describe fully the single transformation that creates shape B from shape A.

Answer:
You should be able to see that the object has been rotated 90o clockwise (or 270o anti-clockwise).
You are likely to be able to see roughly where the centre of rotation is but it may take a little time to find its position exactly.

To find the exact coordinates of the centre of rotation you can play around with tracing paper.
Draw over shape A on tracing paper, then try out different locations for the centre of enlargement by placing your pencil on a point, rotating the paper 90o clockwise and seeing if it lines up with shape B.

Write down the all of the elements required to fully describe the transformation: the type of transformation, the centre of rotation, the angle and the direction.
Rotation, 90° clockwise with centre (-4, 0)
Unlock more, it's free!
Was this revision note helpful?
Build on this topic
Questions students ask about Rotations
Real questions from students revising this topic on Save My Exams
How do you rotate a shape using tracing paper?
Trace the shape, hold your pencil point on the centre of rotation, turn the tracing paper by the given angle and direction, then copy the new position onto the grid.
- Place tracing paper over the grid and draw over the original shape.
- Mark the centre of rotation on the paper.
- Draw an arrow pointing straight up on the paper.
- With your pencil point fixed on the centre, turn the paper:
- 90° anti-clockwise → arrow now points left
- 90° clockwise → arrow now points right
- 180° → arrow now points down
- Read off where each vertex has landed, mark them on the grid and join them up.
Worked example (from this page): rotate triangle A, vertices (3, 1), (3, −3) and (7, −2), by 90° anti-clockwise about (0, 2).
- Turn the paper until the arrow points left.
- The vertices land at (1, 5), (5, 5) and (4, 9). Join them and label the image A'.
Check: put the tracing paper back over the original and rotate again to see it lines up with your image.
How do you find the centre of rotation?
For a 90° or 270° rotation, use tracing paper and trial and error, and for a 180° rotation, join each vertex to its matching vertex on the image — the lines cross at the centre.
90° or 270°
- Trace the original shape.
- Guess a point, hold your pencil on it and rotate the paper by the angle.
- If the tracing lands exactly on the image, that point is the centre. If not, try another point.
180°
- Draw straight lines from each vertex on the original to the matching vertex on the image. They all meet at the centre.
Worked example (from this page): shape B is shape A turned 90° clockwise.
- Test (−4, 0). The corner of A at (−4, 4) is 4 squares directly above it.
- After a 90° clockwise turn that corner should be 4 squares to the right, at (0, 0) — and it is, with the rest of A landing on B.
- Answer: rotation, 90° clockwise, centre (−4, 0)
How do you determine whether a rotation is clockwise or anticlockwise?
Clockwise means turning the same way as the hands on a clock; anti-clockwise means turning the opposite way.
To decide which way a shape has turned:
- Pick a feature of the original that points in a clear direction, such as the stem of a T-shape.
- Find the same feature on the image and see which way it points now.
- Compare the two directions:
- up → right, or down → left: 90° clockwise
- up → left, or down → right: 90° anti-clockwise
- it points the exact opposite way: 180°, and no direction is needed
Worked example (from this page): the stem of shape A points down; on shape B it points left. Going from 6 o'clock to 9 o'clock is the way clock hands move, so it is 90° clockwise.
Remember 90° clockwise gives the same image as 270° anti-clockwise, so either description is accepted. Tracing paper helps: an up arrow points right after 90° clockwise, left after 90° anti-clockwise.