Electrolysis & Faraday’s Law (College Board AP® Chemistry): Study Guide
Electrolysis & Faraday’s law
The amount of substance that is formed at an electrode during electrolysis is proportional to:
The charge passed, q, in coulombs
For a constant current, q = It, so the amount of substance also depends on the current and the time
The relationship between charge, current and time is:
q = I × t (the equations sheet gives I = q/t)
q = charge (coulombs, C)
I = current (amperes, A)
t = time (seconds, s)
The amount or the quantity of electricity can also be expressed by the faraday (F) unit
One faraday is the amount of electric charge carried by 1 mole of electrons or 1 mole of singly charged ions
The Faraday constant, F, is 96,485 C per mole of electrons
So, one faraday of charge is 96,485 C
F is the charge on one mole of electrons:
F = NA × e
NA is Avogadro’s number (6.022 × 1023 mol−1)
e is the charge on one electron
Worked Example
Determine the amount of electricity required for the following reactions:
To deposit 1 mol of sodium
Na+ + e− → Na (from molten NaCl)
To form 1 mol of fluorine gas
2F− → F2 (g) + 2e− (from a molten fluoride)
To deposit 1 mol of magnesium
Mg2+ + 2e− → Mg (from molten MgCl2)
To form 1 mole of oxygen
4OH– (aq) → O2 (g) + 2H2O (l) + 4e–
Answers:
One faraday is the amount of charge (96,485 C) carried by 1 mole of electrons
Answer 1:
One mole of electrons is used
Therefore, one faraday of electricity (96,485 C) is needed to deposit one mole of sodium
Answer 2:
Two moles of electrons are released
Therefore, it requires two faradays of electricity (2 × 96,485 C = 192,970 C) to form one mole of fluorine gas
Answer 3:
Now, two moles of electrons are used
Therefore, two faradays of electricity (2 × 96,485 C = 192,970 C) are required to deposit one mole of magnesium
Answer 4:
Four moles of electrons are released
Therefore, it requires four faradays of electricity (4 × 96,485 C = 385,940 C) to form one mole of oxygen gas
Worked Example
Calculate the mass of magnesium deposited when a current of 2.20 A flows through molten magnesium bromide, MgBr2, for 15 minutes.
Answer:
The magnesium (Mg2+) ion is a positively charged cation that will move toward the cathode
Step 1: Write the half-equation at the cathode
Mg2+ + 2e- → Mg (l)
1 mol + 2 mol → 1 mol
Step 2: Calculate the charge transferred during the electrolysis
q = I × t
q = 2.20 A × (15 × 60 s) = 1980 C
Step 3: Determine the number of coulombs required to deposit one mole of magnesium at the cathode
For every one mole of electrons, the number of coulombs needed is 96,485 C mol-1
In this case, there are two moles of electrons required
So, the charge needed is 2 × 96,485 C = 192,970 C per mole of Mg
Step 4: Calculate the mass of magnesium deposited using the molar mass of Mg (24.30 g/mol)
Charge (C) | Amount of Mg deposited (mol) | Amount of Mg deposited (g) |
192,970 | 1 | 24.30 |
1980 | 1980 C ÷ 192,970 C mol−1 = 0.01026 | 0.01026 × 24.30 = 0.249 |
Therefore, 0.249 g of magnesium is deposited at the cathode
Examiner Tips and Tricks
Take the moles of electrons per mole of metal from the half-equation. It equals the ion’s charge (Ag+ 1, Cu2+ 2, Al3+ 3).
Convert time to seconds before using q = It. Remember that 1 A = 1 C/s.
The mass deposited depends on the charge passed, not on the cell potential. A higher voltage does not deposit more metal unless more charge flows.
Worked Example
A current of 2.18 A is delivered to an electrolytic cell for 65 min.
How many grams of the following will be obtained
1) Al from AlCl3
2) Ag from AgNO3
3) Cu from CuCl2
Answers:
To work out mass:
Write the half equation
Calculate the mol of solid using:
mol of solid =
Calculate the mass of solid using:
mass of solid = mol × M = x g
Answer 1:
Write the half equation:
Al3+ + 3e– → Al
Calculate the mol of solid using:
mol Al =
mol Al = 0.02937 mol
Calculate the mass of solid using:
g Al = 0.02937 × 26.98 g mol–1
g Al = 0.79 g
Answer 2:
Write the half equation:
Ag+ + 1e– → Ag
Calculate the mol of solid using:
mol Ag =
mol Ag = 0.08812 mol
Calculate the mass of solid using:
g Ag = 0.08812 × 107.87 g mol–1
g Ag = 9.51 g
Answer 3:
Write the half equation:
Cu2+ + 2e– → Cu
Calculate the mol of solid using:
mol Cu =
mol Cu = 0.04406 mol
Calculate the mass of solid using:
g Cu = 0.04406 × 63.55 g mol–1
g Cu = 2.80 g
Worked Example
A key is silver-plated using a current of 1.50 A. How many minutes does it take to deposit 0.500 g of silver?
Answer:
Step 1: Write the half-equation to find the moles of electrons per mole of silver
Ag+ (aq) + e− → Ag (s)
So, 1 mol of electrons is needed per mole of Ag
Step 2: Convert the mass of silver to moles
n(Ag) = 0.500 g ÷ 107.87 g/mol
n(Ag) = 0.004635 mol = n(e−)
Step 3: Use the Faraday constant to find the charge needed
q = 0.004635 mol × 96,485 C/mol
q = 447.2 C
Step 4: Rearrange q = It to find the time, then convert it to minutes
t =
t =
t = 298 s
t =
t = 4.97 min
Unlock more, it's free!
Was this revision note helpful?
Build on this topic