Group Properties & Trends (Cambridge (CIE) IGCSE Chemistry): Theory Questions

Exam code: 0620 & 0971

8 hours130 questions
1a
1 mark

Rubidium, Rb, is a Group I element. It has similar physical and chemical properties to the other elements in Group I.

Predict how many electrons there are in the outer shell of a rubidium atom.

1b
1 mark

Predict one physical property of rubidium which is the same as that of a transition element such as iron. 

1c
2 marks

Predict two physical properties of rubidium which are different to those of a transition element such as iron.

1d
7 marks

When rubidium is added to cold water a reaction occurs.

i) Suggest two observations that would be made when rubidium is added to cold water.

[2]

ii) What would be the colour of the solution if methyl orange was added to it after the reaction?

[1]

iii) Write a chemical equation for the reaction between rubidium and water.

[2]

iv) Put the Group I elements, caesium, lithium, potassium, rubidium and sodium in their order of reactivity with water, from the most reactive to the least reactive.

[1]

v) Suggest one safety measure that should be used when rubidium is added to cold water.

[1]

1e
1 mark

Extended Only

The phosphate ion has the formula PO43–. Deduce the formula of rubidium phosphate.

2a
2 marks

Extended Only

For each of the following unfamiliar elements predict one physical and one chemical property.

Caesium (Cs) Physical property ..............................................................................................................
Chemical property .............................................................................................................

2b
2 marks

Vanadium (V) Physical property ..............................................................................................................
Chemical property .............................................................................................................

2c
2 marks

Fluorine (F) Physical property ..............................................................................................................
Chemical property .............................................................................................................

3
2 marks

Copper is a transition element. It has variable oxidation states.

State two other chemical properties of transition elements which make them different from Group I elements.

4
2 marks

Aluminium is extracted by electrolysis. Iron is extracted from its ore by reduction with carbon.

Iron is a transition element. Give two ways in which the properties of transition elements differ from the properties of Group I metals.

5a
2 marks

Complete the word equation to show the halogen and halide compound which react to form the products iodine and potassium bromide.

q4c-0620_s19_qp_31
5b
1 mark

Explain, in terms of the reactivity of the halogens, why aqueous iodine does not react with aqueous potassium chloride.

6a
2 marks

Complete the word equation to show the halogen and halide compound which react to form the products bromine and potassium chloride.

q4ci-0620_s19_qp_32
6b
1 mark

Explain, in terms of the reactivity of the halogens, why aqueous bromine will not react with aqueous potassium chloride.

7
1 mark

The diagram shows part of the structures of five substances, A, B, C, D and E.

q1-0620_s19_qp_33

Which one of these structures, A, B, C, D or E, is monatomic?

8
3 marks

Describe three properties of iron that show that it is a transition element and not a Group I element.

9a
1 mark

Sodium can be extracted from sodium bromide by electrolysis.

Sodium is a metal in Group I of the Periodic Table.

Describe one chemical property of sodium.

9b
2 marks

Which two of these statements about the physical properties of sodium are correct?

Tick two boxes.

q8cii_0620-s20-qp-31_cie-igcse-chemistry
10a
1 mark

A student investigates the reactivity of sodium with water.

Complete the word equation for the reaction between sodium and water.

sodium + water→ ................. + hydrogen

10b
3 marks

The student measures the temperature of the reaction mixture. The temperature increases from 20 ∘C to 30 ∘C.

Complete Fig 4.1 to show the reaction pathway diagram for this reaction. Your diagram should include:

  • labels for reactants and products

  • an arrow representing the enthalpy change, labelled ΔH

Graph with vertical axis labelled 'energy' and horizontal axis labelled 'progress of reaction'; both axes have arrows indicating direction.

Fig 4.1

10c
2 marks

Hydrogen gas is produced in this reaction. Describe the test for hydrogen and the expected observation.

Test:

Observation:

10d
2 marks

Hydrogen reacts with nitrogen to form ammonia, NH3. It has a simple molecular structure and multiple industrial applications.

Complete the dot-and-cross diagram in Fig 4.2 to show the electron arrangement in a molecule of ammonia. Show outer shell electrons only.

Diagram of an ammonia molecule showing a central N atom connected to three surrounding H atoms.

Fig 4.2

10e
3 marks

Sodium is in Group I of the Periodic Table. Iron is a transition element. Sodium reacts rapidly with cold water, whereas iron does not.

i) State the electronic configuration of a sodium atom.

[1]

ii) Describe two other differences in the chemical properties of iron compared to sodium.

[2]

11a
2 marks

Caesium is a metal in Group I of the Periodic Table.

State two physical properties of caesium.

11b
1 mark

Caesium lies below potassium in Group I.

State how the reactivity of caesium with cold water compares with the reactivity of potassium with cold water.

11c
2 marks

Caesium reacts with cold water.

Name the two products of this reaction.

11d
1 mark

Give one observation that would be made when caesium is added to cold water.

11e
1 mark

Caesium is stored under oil.

Suggest why.

12a
4 marks

The table gives some information about the appearance of three halogens at room temperature and pressure.

halogen

colour

physical state

chlorine

bromine

red-brown

iodine

solid

Complete the table.

12b
2 marks

The halogens are described as diatomic non-metals.

State what is meant by diatomic.

Give the formula of a molecule of bromine.

13a
1 mark

A student adds each of three halogen solutions to each of three halide solutions.

The results are shown in the table.

potassium chloride (aq)

potassium bromide (aq)

potassium iodide (aq)

iodine

no reaction

no reaction

no reaction

chlorine

no reaction

reaction occurs

reaction occurs

bromine

no reaction

no reaction

reaction occurs

Use the table to state which of the three halogens is the most reactive.

13b
1 mark

Use the table to state which of the three halogens is the least reactive.

13c
1 mark

Use the table to state whether bromine reacts with aqueous potassium chloride.

13d
1 mark

The density of each of the three halogens at room temperature and pressure is shown.

halogen

density / g cm-3

chlorine

0.0032

bromine

3.10

iodine

4.93

State which of the three halogens is the most dense.

13e
1 mark

State the physical state of the halogen named in your answer above at room temperature and pressure.

14a
1 mark

The table shows the density of three halogens at room temperature and pressure.

halogen

density / g cm-3

chlorine

0.0032

bromine

3.10

iodine

4.93

State the trend in density shown by these three halogens.

14b
1 mark

State the trend in the reactivity of the halogens from chlorine to iodine.

14c
1 mark

A halogen is a red-brown liquid at room temperature and pressure.

Name this halogen.

14d
1 mark

The halogens are diatomic.

Give the formula of a molecule of chlorine.

15a
1 mark

Hydrogen peroxide solution decomposes very slowly at room temperature. When a small amount of manganese(IV) oxide is added, the solution fizzes and the decomposition becomes much faster.

Name the property of the transition elements that manganese(IV) oxide is showing here.

15b
2 marks

At the end of the reaction the manganese(IV) oxide is filtered off, dried and weighed. Its mass is unchanged.

Explain how this result supports your answer to part (a).

15c
2 marks

Suggest why a compound of a transition element is used for this purpose rather than a compound of a Group I metal.

16a
1 mark

The table shows the melting point and the density of three metals.

metal

melting point / °C

density / g cm-3

sodium

98

0.97

iron

1538

7.87

copper

1085

8.96

Which metal in the table is not a transition element?

16b
2 marks

Use the data in the table to describe two ways in which the transition elements in the table differ from sodium.

16c
2 marks

Copper(II) sulfate dissolves in water to give a blue solution. Sodium sulfate dissolves to give a colourless solution.

i) State what this shows about the compounds of the transition elements.

[1]

ii) A student writes that copper is blue. Explain why this is not correct.

[1]

17a
2 marks

Extended Tier Only

Iron forms two different chlorides. Their formulae are FeCl2 and FeCl3.

Deduce the oxidation number of iron in each chloride.

17b
1 mark

Extended Tier Only

Name the property of the transition elements shown by iron forming both of these chlorides.

17c
2 marks

Sodium forms only one chloride, NaCl.

Explain why sodium cannot form a second chloride in the way that iron does.

18a
1 mark

An atom of element X has the electronic configuration 2,8,8.

Deduce which group of the Periodic Table X belongs to.

18b
2 marks

Explain why X forms no compound with chlorine.

18c
1 mark

X is a gas at room temperature and pressure.

State whether the particles in the gas are atoms or molecules.

19a
1 mark

A display sign is filled with neon gas at low pressure.

Neon is an unreactive, monatomic gas.

State what is meant by the term unreactive.

19b
1 mark

State what the particles inside the sign are.

19c
2 marks

A neon atom has the electronic configuration 2,8.

Explain how this configuration accounts for neon being unreactive.

20a
1 mark

Deep-sea divers breathe a mixture of helium and oxygen instead of air.

Helium is a noble gas in Group VIII.

State the number of electrons in the outer shell of a helium atom.

20b
1 mark

Neon and argon each have eight electrons in their outer shell.

Explain why the number for helium is different.

20c
1 mark

Explain why helium does not react with the oxygen it is mixed with.

20d
1 mark

Helium is described as monatomic.

State why helium is described in this way.

21a
1 mark

Titanium is extracted by reacting titanium(IV) chloride with sodium.

The reaction is carried out under argon.

An argon atom has 18 electrons.

Deduce the electronic configuration of an argon atom.

21b
1 mark

State what the electronic configuration of an argon atom shows about its outer shell.

21c
2 marks

Explain why argon takes no part in the reaction between titanium(IV) chloride and sodium.

1a
4 marks

Three of the halogens in Group VII are listed below.

chlorine

bromine

iodine

i) How does their colour change down the Group?

[1]

ii) How do their melting points and boiling points change down the Group?

[1]

iii) Predict the colour and physical state (solid, liquid or gas) of astatine, At. colour ... physical state ...

[2]

1b
5 marks

A radioactive isotope of iodine, I53131, is used to treat cancer.

i) Define the term isotope.

[2]

ii) How many protons, electrons and neutrons are there in one atom of I53131

number of protons .............. number of electrons ............ number of neutrons ............

[2]

iii)When this isotope, I53131, emits radiation, a different element with a proton number of 54 is formed. What is the name of this element?

[1]

1c
2 marks

Extended Only

Fluorine, the most reactive halogen, forms compounds with the other halogens. It forms two compounds with bromine. Deduce their formulae from the following information.

compound 1
The mass of one mole of this compound is 137 g.
Its formula is .................................

[1]

compound 2
0.02 moles of this compound contain 0.02 moles of bromine atoms and 0.1 moles of fluorine atoms.
Its formula is .................................

[1]

2a
2 marks

Extended Only

Use your copy of the periodic table to help you answer these questions.

Predict the formula of each of the following compounds.

i) barium oxide.

[1]

ii) boron oxide.

[1]

2b
2 marks

Give the formula of the following ions.

i) sulphide

[1]

ii) gallium 

[1]

2c
3 marks

Draw a diagram showing the arrangement of the valency electrons in one molecule of the covalent compound nitrogen trichloride.

Use x to represent an electron from a nitrogen atom.

Use o to represent an electron from a chlorine atom.

2d
4 marks

Potassium and vanadium are elements in Period IV.

i) State two differences in their physical properties.

[2]

ii) Give two differences in their chemical properties.

[2]

2e
4 marks

Fluorine and astatine are halogens. Use your knowledge of the other halogens to predict the following:

i) The physical state of fluorine at r.t.p........
The physical state of astatine at r.t.p........

[2]

ii) Two similarities in their chemical properties

[2]

3a
8 marks

Separate: Chemistry Only

For each of the following, give the name of an element from Period 2 (lithium to neon), which matches the description.
Elements may be used once, more than once or not at all.

i) An element which is gaseous at room temperature and pressure

[1]

ii) An element which forms an oxide that is a reactant in photosynthesis

[1]

iii) An element that is a product of photosynthesis

[1]

iv) An element that makes up approximately 78% by volume of the air

[1]

v) An element which has atoms with a full outer shell of electrons

[1]

vi) An element which exists as both diamond and graphite

[1]

vii) An element that reacts vigorously with cold water

[1]

viii) A soft metallic element which is stored in oil

[1]

3b
2 marks

Give the formula of a compound that contains

i) only boron and oxygen,

[1]

ii) only lithium and nitrogen.

[1]

4a
1 mark

Choose an element from the list below which best fits the description.

Rb

Fe

Si

I

P

Sr

An element which reacts with cold water.

4b
1 mark

It is a solid at room temperature and exists as diatomic molecules, X2.

4c
1 mark

Separate: Chemistry and Extended Only

It can form two oxides, XO and X2O3.

4d
1 mark

This element has a hydride of the type XH3.

4e
1 mark

Separate: Chemistry and Extended Only

It has a macromolecular structure similar to that of carbon.

5a
5 marks

Use your copy of the Periodic Table to answer these questions.

Choose an element from the Periodic Table to match each description. You may give either the name or the symbol.

i) It is the most reactive metal.

[1]

ii) It is the only non-metal which is a liquid at r.t.p.

[1]

iii) This Group VII element is a solid at r.t.p.

[1]

iv) This element is in Group V and Period 4.

[1]

v) This unreactive gas is used to fill lamps.

[1]

5b
2 marks

Predict the formula of each of the following compounds.

i) Germanium oxide

[1]

ii) Tellurium bromide

[1]

5c
2 marks

Give the formula of each of the following ions.

i) Strontium

[1]

ii) Fluoride

[1]

6a
1 mark

For each of the following select an element from Period 4, potassium to krypton, that matches the description.

It is a brown liquid at room temperature.

6b
1 mark

It forms a compound with hydrogen having the formula XH4.

6c
1 mark

A metal that reacts violently with cold water.

6d
1 mark

It has a complete outer energy level.

6e
1 mark

Separate: Chemistry and Extended Only

It has oxidation states of 2 and 3 only.

6f
1 mark

It can form an ion of the type X-.

6g
1 mark

Separate: Chemistry and Extended Only

One of its oxides is the catalyst in the Contact Process.

7a
1 mark

For each of the following, give the name of an element from Period 3 (sodium to argon), which matches the description.

An element which is gaseous at room temperature and pressure

7b
1 mark

An element that is added to water to kill bacteria.

7c
1 mark

An element that forms a basic oxide of the type XO.

7d
1 mark

Extended Only

An element that forms an amphoteric oxide.

7e
1 mark

An element that reacts vigorously with cold water to produce hydrogen.

8a
3 marks

Table 1 shows some properties of some of the halogens.                                                                   Table 1

q7a_specimen-paper-0620-03-cie-igcse-chemistry

Use the information in Table 1 to suggest:

  • the colour of astatine ______________

  • the boiling point of bromine ____________

  • the state of iodine at 190 °C _______________

8b
1 mark

Aqueous chlorine reacts with aqueous potassium bromide as shown.                                              

Cl2 + 2KBr → Br2 + 2KCl

Name the salt formed in this reaction.

8c
1 mark

Explain why aqueous bromine does not react with aqueous potassium chloride.

8d
2 marks

Complete the dot-and-cross diagram in Figure 1 of a molecule of chlorine. Show outer shell electrons only.

q7biii_specimen-paper-0620-03-cie-igcse-chemistry

Figure 1

9a
5 marks

The diagram shows part of the structures of sodium bromide and sulfur.

q8_0620-s20-qp-31_cie-igcse-chemistry

Describe both sodium bromide and sulfur in terms of:

bonding

electrical conductivity

solubility in water

9b
1 mark

Sulfur is an element.

What is meant by the term element?

9c
2 marks

A coloured crystal of cobalt(II) chloride is placed at the bottom of a beaker containing water. Colour spreads throughout the water over time. Figure 1 shows the spread of colour after two days.

MSo-3p2~_q3_specimen-paper-0620-03-cie-igcse-chemistry

Figure 1

Cobalt is a transition element. Lithium is a Group I element.

Describe two ways in which the properties of cobalt differ from those of lithium.

10a
1 mark

The properties of the first four Group I elements are shown in the table.

element

density in g / cm3

melting point / °C

boiling point / °C

lithium

0.53

181

1342

sodium

0.97

98

883

potassium

0.86

63

760

rubidium

 

39

686

Answer these questions using only the information in the table.

Describe the general trend in the boiling points of the Group I elements.

10b
1 mark

Explain why it is difficult to predict the density of rubidium.

10c
2 marks

Deduce the state of rubidium at 45 °C. Explain your answer.

11a
1 mark

The table shows the melting points of some Group I metals.

metal

melting point / °C

lithium

181

sodium

98

potassium

63

rubidium

caesium

29

Describe the trend in melting point shown in the table.

11b
1 mark

Predict the melting point of rubidium.

11c
2 marks

Francium is also in Group I. A student predicts that the melting point of francium is 50 °C.

Explain why this prediction cannot be correct.

11d
2 marks

State which metal in the table is the most reactive with cold water.

Give a reason for your answer.

11e
1 mark

Lithium has the highest melting point of the metals in the table.

Suggest why lithium is still described as having a low melting point for a metal.

12a
1 mark

The table shows the density of three halogens at room temperature and pressure.

halogen

density / g cm-3

chlorine

0.0032

bromine

3.10

iodine

4.93

A fourth halogen lies below iodine in Group VII.

State whether this halogen would be more dense or less dense than iodine.

12b
2 marks

Extended Tier Only

Aqueous bromine reacts with aqueous potassium iodide.

Construct the ionic equation for this reaction.

Include state symbols.

12c
2 marks

The experiment is repeated using aqueous sodium iodide in place of aqueous potassium iodide.

Predict whether a reaction occurs.

Explain your answer.

13a
2 marks

Copper is a transition element. It has variable oxidation states.

State two other chemical properties of transition elements which make them different from Group I elements.

13b
6 marks

Extended Tier Only

When copper(II) oxide is heated at 800 °C it undergoes the reaction shown by the equation.

4CuO → 2Cu2O + O2

(i) Identify the changes in oxidation numbers of copper and oxygen in this reaction.

Explain in terms of changes in oxidation numbers why this is a redox reaction. change in oxidation number of copper: from …………… to …………… change in oxidation number of oxygen: from …………… to ……………

explanation ........................................................................................

[3]

(ii) Calculate the volume of oxygen, measured at r.t.p., which is formed when 1.60 g of CuO reacts as shown in the equation.

 4CuO → 2Cu2O + O2

 ..................................................... dm3 [3]

13c
3 marks

Extended Tier Only

Copper metal is obtained when scrap iron is added to aqueous copper(II) sulfate.

(i) The reaction between iron and aqueous copper(II) sulfate is a displacement reaction.

State why this displacement reaction takes place.

 [1]

(ii) Write a symbol equation for the reaction between iron and aqueous copper(II) sulfate.

 [1]

(iii) A displacement reaction is one method for obtaining copper metal from aqueous copper(II) sulfate.

Identify another method for obtaining copper metal from aqueous copper(II) sulfate. 

[1]

14a
2 marks

A solid compound R dissolves in water to give a colourless solution.

State what this suggests about compound R.

Give the reason for your answer.

14b
3 marks

Compound R is later found to be zinc sulfate. Zinc lies in the same block of the Periodic Table as the transition elements, and all zinc compounds are white and give colourless solutions.

Explain what this tells you about using colour on its own to decide whether an element belongs to that block.

14c
2 marks

Suggest a different property that could be investigated to help decide whether a metal belongs to that block of the Periodic Table.

State what result would support the conclusion.

15a
3 marks

This question is about halogens and halogen compounds.

Deduce the number of electrons, neutrons and protons in one atom of the isotope of chlorine shown.

Cl1737

number of electrons

number of neutrons

number of protons

15b
1 mark

State why chlorine is used in water treatment. 

15c
3 marks

Aqueous chlorine reacts with aqueous potassium iodide. 

(i) Complete the chemical equation for this reaction.

Cl2 + .....KI → .....KCl + I2

[2] 

(ii) Explain in terms of the reactivity of the halogens why aqueous iodine does not react with aqueous potassium chloride. 

[1]

15d
4 marks

The table shows some properties of four halogens.

halogen

melting point / °C

boiling point / °C

density of liquid at boiling point in g/cm3

fluorine

–220

1.51

chlorine

–101 

–35

bromine

–7

59

3.12

iodine

114

184

4.93

(i) Complete the table by predicting: 

  • the boiling point of fluorine 

  • the density of liquid chlorine at its boiling point. 

[2] 

(ii) Predict the physical state of chlorine at –105°C. 

Give a reason for your answer.

[2] 

16a
3 marks

A student is asked to describe two ways in which chromium differs from potassium. Chromium is a transition element and potassium is a Group I metal.

The student writes three statements.

1

Chromium is hard.

2

Chromium forms coloured compounds and potassium does not.

3

Chromium conducts electricity and potassium does not.

For each statement, explain whether it would be credited.

16b
1 mark

Rewrite statement 1 so that it would be credited.

16c
2 marks

In a later answer the same student writes that chromium is coloured.

Explain why this would not be credited.

17a
2 marks

The Periodic Table can be used to classify elements. 

Group I elements react with cold water to form alkaline solutions. 

(i) Place the Group I elements caesium, lithium, potassium, rubidium and sodium in their order of reactivity with water. 

Put the most reactive element first.

most reactive → least reactive 

[1] 

(ii) Name the alkaline solution formed when caesium reacts with cold water. 

[1]

17b
1 mark

Group I elements have lower melting points than transition elements. 

Describe one other difference in the physical properties of Group I elements and transition elements.

17c
1 mark

Group VII elements are known as the halogens. 

Astatine is below iodine in Group VII. 

Predict the physical state of astatine at room temperature and pressure.

17d
4 marks

Extended Tier Only

Some Group VII elements react with aqueous solutions containing halide ions.

When aqueous chlorine is added to aqueous potassium bromide a reaction occurs. 

The ionic half-equations for the reaction are shown.

Cl2(aq) + 2e– → 2Cl–(aq)

2Br–(aq) → Br2(aq) + 2e–

(i) Describe the colour change of the solution. 

original colour of potassium bromide solution ................................................

final colour of reaction mixture .........................................................................

[2]

(ii) Identify the species that is oxidised.

Explain your decision. 

species oxidised ................................................................................................... 

explanation ...........................................................................................................

[2]

17e
3 marks

Extended Tier Only

Bromine monochloride, BrCl, is made by the reaction between bromine and chlorine.

The chemical equation is shown.

Br2(g) + Cl2(g) → 2BrCl(g)

bond

bond energy in kJ /mol 

Br–Br 

190

Cl–Cl

242

Br–Cl

218

Calculate the overall energy change for the reaction using bond energies.

Use the following steps.

  • Calculate the total amount of energy required to break the bonds in 1 mole of Br2(g) and 1 mole of Cl2(g)

.............................. kJ

  • Calculate the total amount of energy released when the bonds in 2 moles of BrCl(g) are formed.

.............................. kJ

  • Calculate the overall energy change for the reaction.

.............................. kJ/mol

18a
3 marks

A student is given four solids.

solid

appearance

effect on the decomposition of hydrogen peroxide

W

white

no change in rate

X

green

no change in rate

Y

black

rate increases

Z

white

rate increases

i) Give the letter of one solid which gives evidence that a transition element is present because of its appearance.

[1]

ii) Give the letter of one solid which gives evidence that a transition element is present because of its effect on the hydrogen peroxide.

[1]

iii) Give the letter of the solid for which there is no evidence that a transition element is present.

[1]

18b
3 marks

Solid Z is white but it does increase the rate of the decomposition.

Explain why the student cannot conclude from the table alone whether solid Z contains a transition element.

18c
2 marks

Zinc lies in the same block of the Periodic Table as the transition elements. All zinc compounds are white and dissolve to give colourless solutions.

Suggest why this makes zinc an unusual member of that block.

Suggest one further test the student could carry out on a zinc compound to investigate whether it behaves like a transition element.

19a
3 marks

This question is about Group I and Group VII elements.

Deduce the number of electrons, neutrons and protons in one atom of the isotope of potassium shown. 

K1940

number of electrons ..............................................

number of neutrons ................................................

number of protons ..................................................

19b
2 marks

Complete the chemical equation for the reaction of potassium with water to form potassium hydroxide and a gas which pops with a lighted splint.

2K + .....H2O → 2KOH + ..........

19c
4 marks

The table shows some properties of four Group I elements.

element

melting point / °C

boiling point / °C

relative hardness

lithium

181

1342

5.0

sodium

883

0.7

potassium

63

760

rubidium

39

686

0.2

(i) Complete the table by predicting:

  • the melting point of sodium

  • the relative hardness of potassium.                                                                       

[2]

(ii) Predict the physical state of potassium at 100 °C. Give a reason for your answer.

[2]

19d
2 marks

Aqueous bromine reacts with aqueous potassium iodide.

Br2 + 2KI → 2KBr + I2

(i) Explain how this equation shows that bromine is more reactive than iodine.

 [1]

(ii)     State the colour of aqueous iodine.

 [1]

19e
1 mark

Bromine is a diatomic molecule.

State the meaning of the term diatomic.

19f
1 mark

Bromine liquid turns into a gas very easily at room temperature.

Choose the word which best describes a substance that evaporates easily. 

Draw a circle around your chosen answer.

conductor  flammable  malleable    volatile

20a
2 marks

Extended Tier Only

Chromium is a transition element. Two of its oxides are Cr2O3 and CrO3.

Deduce the oxidation number of chromium in each oxide.

20b
3 marks

The properties of the transition elements can be sorted into physical properties and chemical properties.

i) Give one physical property of the transition elements.

[1]

ii) Give one chemical property of the transition elements.

[1]

iii) Explain why acting as a catalyst is a chemical property rather than a physical property.

[1]

20c
2 marks

Chromium(III) oxide is a green solid. Chromium metal is a shiny silver-grey solid.

Explain what this tells you about where the colour of a transition element compound comes from.

21a
1 mark

This question is about the elements in Group VII of the Periodic Table, and their compounds.

State the general name given to the elements in Group VII.

21b
3 marks

Chlorine gas is bubbled through aqueous potassium bromide. A displacement reaction occurs.

(i) State one observation that is made during this reaction.

[1]

(ii) Predict whether a reaction would occur if aqueous iodine is added to aqueous potassium bromide instead of chlorine. Explain your reasoning.

prediction

explanation

[2]

21c
4 marks

Chlorine reacts with methane, CH4​, in a substitution reaction.

i) State the essential condition required for this reaction to happen.

[1]

ii) The chemical equation for the reaction is shown.

CH4​(g) + Cl2​(g) → CH3​Cl (g) + HCl (g)

Some bond energies are given in Table 5.1.

bond

bond energy in kJ / mol

C–H

410

Cl–Cl

240

C–Cl

340

H–Cl

430

Calculate the enthalpy change for this reaction. Show your working. Use the following steps:

  • Calculate the energy needed to break the bonds.

energy = .............................. kJ/mol

  • Calculate the energy released in forming the bonds.

energy = .............................. kJ/mol

  • Determine the overall enthalpy change for the reaction.

enthalpy change = .............................. kJ/mol

[3]

21d
3 marks

PVC is an addition polymer that contains chlorine.

i) State one use of PVC.

[1]

ii) The structure of PVC is shown in Fig 5.1

Six-carbon chain. First and last carbon have one straight horizontal line showing the polymer notation. Cl attached to carbon 1, carbon 3, and carbon 5. Remaining bonds are H.

Fig 5.1

Draw the displayed formula of the monomer used to make PVC. Show all of the atoms and all of the bonds.

[2]

22a
1 mark

A student is asked what the term monatomic means.

The student answers:

an element with one atom

State why this answer is not precise enough.

22b
1 mark

Write a more precise definition of the term monatomic.

22c
2 marks

Neon gas is written as Ne and not as Ne2.

Explain why, in terms of outer shell electrons.

23a
2 marks

Sodium atoms form Na+ ions and chlorine atoms form Cl- ions.

Explain, in terms of outer shell electrons, why these two ions have opposite charges.

23b
2 marks

Argon atoms form neither Ar+ nor Ar- ions.

Explain why.

24a
1 mark

The noble gases are described as unreactive.

Chemists have nevertheless succeeded in making a small number of compounds of xenon, including XeF4.

State the number of electrons in the outer shell of a xenon atom.

24b
2 marks

Explain why xenon reacts only with great difficulty.

24c
1 mark

Fluorine is the most reactive non-metal.

Suggest why xenon forms a compound with fluorine rather than with a less reactive element.

25a
1 mark

A student is asked to explain why the noble gases are unreactive.

The student writes:

The noble gases have a stable octet.

This answer does not gain full credit.

State what the student has left out.

25b
2 marks

Write a corrected explanation of why argon is unreactive.

25c
1 mark

Explain why the student's wording is wrong for helium in particular.

1a
1 mark

The table shows the densities of the five Group I metals from lithium to caesium.

metal

density / g cm-3

lithium

0.53

sodium

0.97

potassium

0.86

rubidium

1.53

caesium

1.88

Describe the general trend in density shown in the table.

1b
1 mark

Identify the two neighbouring metals in the table between which the density does not follow the general trend.

1c
2 marks

Explain why the density of the Group I metals can still be described as increasing down the group.

1d
2 marks

Francium lies below caesium in Group I.

Predict the density of francium.

State how certain this prediction can be.

1e
2 marks

State two properties of the Group I metals that change in the same direction at every step down the group.

2a
3 marks

A student investigates four metals, W, X, Y and Z. The results are shown in the table.

metal

melting point / °C

density / g cm-3

behaviour with cold water

W

98

0.97

reacts rapidly, the metal melts

X

1538

7.87

no reaction

Y

29

1.88

reacts violently, the metal ignites

Z

660

2.70

no reaction

Identify the two metals that are in Group I.

Use two pieces of evidence from the table to support your answer.

2b
2 marks

Deduce which of the two Group I metals lies higher in the group.

Give a reason for your answer, using data from the table.

2c
2 marks

The student concludes that any metal which reacts with cold water must be in Group I.

Explain why this conclusion is not safe.

2d
1 mark

Name the gas produced when W reacts with cold water.

3a
2 marks

Element J is a neutral atom containing 37 electrons.

Element L is a neutral atom containing 55 electrons.

Explain how this information shows that J and L are both in Group I of the Periodic Table.

3b
2 marks

State which of J and L lies lower in Group I.

Give a reason for your answer.

3c
1 mark

Predict how the melting point of L compares with the melting point of J.

3d
1 mark

Predict how the density of L compares with the density of J.

3e
2 marks

Element M is a neutral atom containing 11 electrons.

Place J, L and M in order of increasing reactivity with cold water.

Give a reason for the order you have chosen.

4a
2 marks

Aqueous chlorine is added to aqueous potassium bromide in a test tube.

A reaction occurs.

Describe what is observed.

4b
2 marks

Name the species that is displaced from the solution in this reaction.

State whether this species is an atom, a molecule or an ion.

4c
2 marks

Extended Tier Only

State, in terms of electrons, what happens to the bromide ions in this reaction.

5a
3 marks

A compound of a metal is thought to act as a catalyst.

Describe how a student could obtain evidence for this, stating what would be measured and what results would support the conclusion.

5b
3 marks

Extended Tier Only

A metal M forms two chlorides, MCl2 and MCl3.

Explain how these two formulae provide evidence that M is a transition element.

5c
3 marks

Extended Tier Only

A third student says that finding a coloured compound of a metal is the quickest way to prove that the metal is a transition element.

Explain why this method is less reliable than the evidence in parts (a) and (b).

6a
3 marks

In an industrial process, a compound of a transition element is packed into a reactor. Over many months the same compound continues to speed up the reaction, and only a small amount has to be replaced.

Explain why the compound does not have to be replaced after each batch.

6b
2 marks

The company tests a compound of a Group I metal in the same reactor under the same conditions. The rate of reaction is unchanged.

Suggest what this result shows.

6c
2 marks

The reactor operates at 450 °C.

Suggest one physical property of transition elements that makes a transition metal suitable for building the parts of the reactor.

Justify your answer.

7a
2 marks

The relative atomic mass of argon is 40.

A student states that the relative molecular mass of argon gas is 80.

Explain why argon gas has no relative molecular mass.

7b
2 marks

The student has assumed that argon gas is made of Ar2 particles.

Explain, in terms of electronic configuration, why Ar2 does not exist.

8a
1 mark

A student writes the following about the noble gases.

Every noble gas atom has eight electrons in its outer shell, so the noble gases are unreactive.

State whether the student's conclusion that the noble gases are unreactive is correct.

8b
2 marks

Explain what is wrong with the student's reasoning.

8c
2 marks

Rewrite the student's statement so that it is correct for every noble gas.

9a
5 marks

The halogens are a collection of diatomic non-metals in Group VII.

i) Define the term diatomic.

[1]

ii) What do the electron distributions of the halogens have in common?

[1]

iii) How do their electron distributions differ?

[1]

iv) Complete the table.

halogen

solid, liquid or gas

at room temperature

colour

chlorine

 

 

bromine

 

 

iodine

 

 

[2]

9b
3 marks

The halogens react with other non-metals to form covalent compounds.

Draw a diagram which shows the arrangement of the valency electrons in one molecule of the covalent compound arsenic trifluoride.

The electron distribution of an arsenic atom is 2 + 8 + 18 + 5.
Use x to represent an electron from an arsenic atom.
Use o to represent an electron from a fluorine atom.

9c
3 marks

Photochromic glass is used in sunglasses. In bright light, the glass darkens reducing the amount of light reaching the eye. When the light is less bright, the glass becomes colourless increasing the amount of light reaching the eye.
Photochromic glass contains very small amounts of the halides silver(I) chloride and copper(I) chloride.
The reaction between these two chlorides is photochemical.

AgCl  +  CuCl ⇌ Ag +  CuCl2

colourless  colourless  black  colourless

How does photochromic glass work?

10a
3 marks

Scandium, proton number 21, is not a typical transition element.

Scandium is a low density metal which has only one oxidation state in its compounds. Scandium compounds are white solids which form colourless solutions. Titanium, the next metal in the period, is a far more typical transition element. 

How would the properties of titanium differ from those of scandium?

10b
3 marks

Scandium fluoride is an ionic compound. The valency of scandium in scandium fluoride is three.

Draw a diagram which shows the formula of this compound, the charges on the ions and the arrangement of the valency electrons around the negative ions.

Use × to represent an electron from a fluorine atom.
Use ○ to represent an electron from a scandium atom.

10c
3 marks

Scandium oxide is insoluble in water. Describe how you could show that it is an amphoteric oxide.

11a
1 mark

For each of the following, select an element from Period 4, potassium to krypton, which matches the description.

A metal that reacts rapidly with cold water to form a compound of the type M(OH)2 and hydrogen.

11b
1 mark

Its only oxidation state is 0.

11c
1 mark

It has a macromolecular oxide, XO2, which has similar physical properties to those of diamond.

11d
1 mark

This is one of the metals alloyed with iron in stainless steel.

11e
1 mark

It can be reduced to an ion of the type X–.

11f
1 mark

It can form a covalent hydride having the formula H2X.

11g
1 mark

Its soluble salts are blue and its oxide is black.

11h
1 mark

It is a liquid at room temperature.

12a
4 marks

This question is concerned with the elements in Period 5, Rb to Xe.

The electron distributions of some of these elements are given in the following list.

Element B

2 + 8 + 18 + 18 + 8

Element C

2 + 8 + 18 + 18 + 5

Element D

2 + 8 + 18 +18 + 6

Element E

2 + 8 + 18 + 18 + 4

Element F

2 + 8 + 18 + 18 + 7

i) Identify element C.

[1]

ii) Which element in the list does not form any compounds?

[1]

iii) Which element in the list forms a chloride of the type XCl2?

[1]

iv) Which two elements would react together to form a compound of the type XY4?

[1]

12b
4 marks

Predict two differences in physical properties and two differences in chemical properties between rubidium and the transition metal niobium.

13a
4 marks

Three of the halogens in Group VII are:

chlorine
bromine
iodine

i) How does their colour change down the Group?

[1]

ii) How does their physical state (solid, liquid or gas) change down the Group?

[1]

iii) Predict the colour and physical state of fluorine.

Colour ....................
Physical state ....................

[2]

13b
3 marks

Describe how you could distinguish between aqueous potassium bromide and aqueous potassium iodide.

Test ....................

Result with bromide ............................................................

Result with iodide ............................................................

13c
2 marks

0.015 moles of iodine react with 0.045 moles of chlorine to form 0.030 moles of a single product.

Complete the equation.

I2 + ............ Cl2 → ................................

13d
2 marks

Traces of chlorine can be separated from bromine vapour by diffusion.

Which gas would diffuse the faster and why?

14a
2 marks

Rubidium and strontium are very reactive metals at the top of the reactivity series. Because their ions have different charges, their compounds behave differently when heated.

The formulae of the ions of these two elements are Rb+ and Sr2+.

Explain why these metals, which are in different groups, form ions which have different charges.

14b
5 marks

Strontium carbonate is similar to calcium carbonate. It is insoluble in water and it decomposes when heated. Rubidium carbonate is soluble in water and does not decompose when heated.

i) Describe a method to prepare a pure sample of the insoluble salt, strontium carbonate, by precipitation.

[4]

ii) Complete the equation for the decomposition of strontium carbonate.

SrCO3 → ............ + ............

[1]