Properties, Uses & Alloys of Metals (Cambridge (CIE) IGCSE Chemistry): Exam Questions

Exam code: 0620 & 0971

8 hours103 questions
1a
2 marks

Separate: Chemistry Only

The uses of a substance are determined by its properties.

Plastics are poor conductors of electricity. They are used as insulation for electric cables. Which other two properties of plastics make them suitable for this purpose?

1b
2 marks

Separate: Chemistry Only

Chromium is a hard, shiny metal. Suggest two reasons why chromium is used to electroplate steel.

1c
2 marks

Why is aluminium used extensively in the manufacture of aeroplanes?

screen-shot-2022-09-15-at-17-28-50

 

1d
2 marks

Why is copper a suitable material from which to make cooking utensils?

screen-shot-2022-09-15-at-17-28-56
1e
2 marks

Extended Only

Describe the bonding in a typical metal.

2a
2 marks

About 4000 years ago the Bronze Age started in Britain. Bronze is an alloy of copper and tin.

i) Suggest a reason why a bronze axe was better than a copper axe.

[1]

ii) Brass is another copper alloy. Name the other metal in brass.

[1]

2b
6 marks

Extended Only

The diagram below shows the arrangement of particles in a pure metal.

pure-metal-

i) What is the name given to a regular arrangement of particles in a crystalline solid?

[1]

ii) Draw a diagram which shows the arrangement of particles in an alloy.

[2]

iii) Explain the term malleable.

[1]

iv) Why are metals malleable?

[2]

2c
2 marks

The common ore of tin is tin(IV) oxide and an ore of copper is malachite, CuCO3.Cu(OH)2.

i) Write a word equation for the reduction of tin(IV) oxide by carbon.

[1]

ii) Give one use of copper, other than making alloys.

[1]

3a
1 mark

Table 1.1 shows the properties of four substances.                          

Table 1.1

q5a_specimen-paper-0620-03-cie-igcse-chemistry

State the property of aluminium given in Table 1.1 which makes it suitable for the manufacture of aircraft.

3b
2 marks

Aluminium is used in overhead electricity cables.

Give two properties of aluminium that make it suitable for use in overhead electricity cables.

3c
1 mark

The diagrams show part of the structures of five substances, A, B, C, D and E.

q1-0620_s19_qp_33

Which one of these structures, A, B, C, D or E,  is used in electrical wiring?

4a
3 marks

Iron is a metal.

Give three physical properties that are characteristic of metals.

4b
2 marks

Iron reacts with chlorine and other halogens.

Name two other substances which react with iron.

5a
1 mark

Alloys of copper are used to make coins. 

What is meant by the term alloy?

5b
1 mark

Suggest why an alloy of copper is used to make coins instead of using pure copper.

5c
1 mark

The diagrams show part of the structures of five substances, A, B, C, D and E.

q1-0620_s19_qp_32

State which one of these structures, conducts electricity when solid.

6a
1 mark

An alloy of cobalt, chromium and molybdenum is used to make cutlery.

Which one of the following diagrams best represents the structure of the alloy?

Draw a circle around the correct answer.

q6e-0620_s19_qp_32
6b
1 mark

Which one of these substances is also used to make cutlery?

Tick one box. 

mercury

 

sodium

 

stainless steel

 

graphite

 

6c
1 mark

An alloy contains zinc, copper and aluminium. What is meant by the term alloy?

6d
1 mark

Zinc and copper are elements next to each other in the Periodic Table.

Name the alloy formed when zinc is mixed with copper.

7a
2 marks

A metal spoon and a wooden spoon are both left standing in a pan of hot soup.

After a few minutes the handle of the metal spoon is hot, but the handle of the wooden spoon is still cool.

Explain this difference.

7b
2 marks

Sodium is a soft metal with a low melting point.

State whether sodium is a good or a poor conductor of electricity.

Give a reason for your answer.

7c
1 mark

Sodium reacts with cold water.

Name the gas produced in this reaction.

8a
3 marks

Metal M reacts with dilute hydrochloric acid, with cold water and with oxygen.

Complete the table to give the products of each reaction.

reaction

products

M and dilute hydrochloric acid

M and cold water

M and oxygen

8b
1 mark

Metal M is stored under oil.

Suggest why.

9a
3 marks

Lead is a metal and sulfur is a non-metal.

Complete the table to compare three physical properties of lead and sulfur.

property

lead

sulfur

conducts electricity when solid

malleable or brittle

appearance, shiny or dull

9b
1 mark

State the meaning of the term malleable.

9c
1 mark

Sulfur does not conduct electricity when it is solid.

A student concludes that no non-metal can conduct electricity.

Explain why the student's conclusion is wrong.

9d
1 mark

State one physical property, not given in the table in part (a), in which lead differs from sulfur.

10a
2 marks

Tin is a metal.

Four statements about tin are shown.

1

Tin melts at 232 °C

2

Tin reacts with dilute hydrochloric acid

3

Tin can be hammered into thin sheets

4

Tin burns in oxygen

Two of these statements describe chemical properties of tin.

Identify these two statements.

10b
2 marks

Tin reacts with excess dilute hydrochloric acid.

Name the two products of this reaction.

10c
1 mark

Tin burns in oxygen when it is heated strongly.

Write the word equation for this reaction.

10d
1 mark

A student says that tin cannot be a metal because it melts at only 232 °C.

Explain why the student is wrong.

11a
2 marks

Copper is used for the electrical wiring inside houses.

Give two properties of copper that make it suitable for electrical wiring.

11b
1 mark

State what is meant by the term malleable.

11c
1 mark

Water pipes in houses are often made from copper.

Suggest why copper is suitable for carrying drinking water.

11d
1 mark

Overhead electrical cables are made from aluminium rather than from copper.

State the property of aluminium, other than its electrical conductivity, that makes it suitable for overhead electrical cables.

11e
1 mark

Aluminium overhead electrical cables often contain a core of steel.

Suggest why a core of steel is used.

12a
1 mark

Aluminium is used to make food containers.

State the property of aluminium that makes it suitable for this use.

12b
1 mark

Aluminium is also used in the manufacture of aircraft.

State the property of aluminium that makes it suitable for this use.

12c
2 marks

Overhead electrical cables are made from aluminium.

Give two properties of aluminium that make it suitable for overhead electrical cables.

12d
2 marks

Metals share a number of physical properties.

State two physical properties that most metals have.

13a
2 marks

Jewellery is made from an alloy of gold and copper.

i) State whether the gold alloy is an element, a compound or a mixture.

[1]

ii) Give a reason for your answer.

[1]

13b
2 marks

Jewellery is made from an alloy of gold and copper rather than from pure gold.

i) State the property of the gold alloy that makes it more suitable than pure gold for making jewellery.

[1]

ii) State one other property of gold that makes it suitable for jewellery.

[1]

13c
2 marks

18-carat gold contains 75% gold by mass. 9-carat gold contains 37.5% gold by mass. Both are alloys of gold and copper.

i) State what this information shows about the composition of an alloy.

[1]

ii) Suggest why jewellers make both 18-carat and 9-carat gold.

[1]

14a
2 marks

Brass and cupronickel are alloys of copper.

i) State what is meant by the term alloy.

[1]

ii) Name the two metals in brass.

[1]

14b
2 marks

Coins are made from cupronickel, which is an alloy of copper and nickel. Coins are not made from pure copper.

i) State the property of cupronickel that makes it more suitable than pure copper for making coins.

[1]

ii) Suggest why this property is important for a coin.

[1]

14c
2 marks

Stainless steel is an alloy of iron.

Name two elements, other than iron, that are present in stainless steel.

1a
3 marks

Strontium and zinc are both metals with a valency of 2. Strontium is more reactive than zinc. Its chemistry is similar to that of calcium.

i) Complete the following table that shows the number of protons, electrons and neutrons in each particle.

particle

protons

electrons

neutrons

Sr presubscript blank presuperscript 88

 

 

 

begin mathsize 16px style Sr presubscript blank presuperscript 90 end style

 

 

 

Zn presubscript blank presuperscript 65 superscript 2 plus end superscript

 

 

 

[3]

ii) Explain why Sr presubscript blank presuperscript 88 and Sr presubscript blank presuperscript 90 are isotopes.

[1]

1b
5 marks

Extended Only

The major ore of strontium is its carbonate, SrCO3. Strontium is extracted by the electrolysis of its molten chloride.

i) Name the reagent that will react with the carbonate to form the chloride.

[1]

ii) The electrolysis of molten strontium chloride produces strontium metal and chlorine. Write ionic equations for the reactions at the electrodes.

negative electrode (cathode) .............. positive electrode (anode) ................

[2]

iii) One of the products of the electrolysis of concentrated aqueous strontium chloride is chlorine. Name the other two.

[2]

1c
6 marks

Both metals react with water.

i) Write a word equation for the reaction of zinc and water and state the reaction conditions.

word equation .........

[1]

conditions ............

[2]

ii) Write an equation for the reaction of strontium with water and give the reaction condition.

equation .........

[2]

condition .........

[1]

2a
4 marks

Extended Only

Gallium is a metallic element in Group III. It has similar properties to aluminium.

i) Describe the structure and bonding in a metallic element. You should include a labelled diagram in your answer.

[3]

ii) Explain why metallic elements such as gallium are good conductors of electricity.

[1]

2b
2 marks

Extended Only

Give the formula of

Gallium(III) chloride ......................................

Gallium(III) sulfate ........................................

2c
4 marks

Extended Only

Gallium(III) oxide, Ga2O3, is amphoteric.

i) Write the chemical equation for the reaction between gallium(III) oxide and dilute nitric acid to form a salt and water only.

[2]

ii) The reaction between gallium(III) oxide and sodium hydroxide solution forms only water and a salt containing the negative ion Ga2O42–.

Write the chemical equation for this reaction.

[2]

2d
2 marks

Alloys of gallium and other elements are often more useful than the metallic element itself.

Suggest two reasons why alloys of gallium are more useful than the metallic element.

3a
3 marks

Brass is an alloy which contains zinc.

i) Name the other metal in brass.

[1]

ii) Suggest two reasons why an alloy such as brass is preferred to either of its constituent metals.

[2]

3b
5 marks

Extended Only

In an experiment to investigate the rate of rusting of steel, three pieces of steel were used. One piece of steel was completely coated with copper, one piece was completely coated with zinc and the third piece was left uncoated. All three pieces were left exposed to the atmosphere.

i) Explain why the uncoated piece started to rust.

[1]

ii) The coating on both of the other two pieces was scratched, exposing the steel.

screen-shot-2022-09-14-at-11-14-25

The piece of steel coated with zinc still did not rust but the copper-coated piece of steel rusted very rapidly.

Explain these observations in terms of the formation of ions and the transfer of electrons.

[4]

4a
4 marks

Iron from the blast furnace is impure. It contains about 4% carbon and 0.5% silicon. Most of this impure iron is used to make mild steel, an alloy of iron containing less than 0.25% carbon.

A jet of oxygen is blown through the molten iron in the presence of a base, usually calcium oxide. Explain how the percentage of carbon is reduced and how the silicon is removed. 

4b
2 marks

i) Why are steel alloys used in preference to iron?

[1]

ii) State a use of the following alloy.

Stainless steel

[1]

4c
4 marks

Extended Only

Both iron and steel have typical metallic structures - a lattice of positive ions and a sea of electrons.

i) Suggest an explanation for why they have high melting points.

[2]

ii) Explain why, when a force is applied to a piece of steel, it does not break but just changes its shape.

[2]

5a
3 marks

Vanadium is a transition element.

An atom of the most common isotope of vanadium can be represented as V2351.

Complete the following table to show the number of protons, electrons and neutrons in each particle.

cie-9-1-chart
5b
4 marks

The major use of vanadium is to make vanadium steel alloys.

 i) Explain the phrase steel alloys.

[2]

ii) State the name and use of another steel alloy.

[2]

5c
5 marks

Two of the oxidation states of vanadium are +3 and +4.

 i) Write the formula of vanadium(III) oxide and of vanadium(IV) oxide.

[2]

ii) Vanadium(III) oxide is basic and vandium(IV) oxide is amphoteric. Describe how you would obtain a sample of vanadium(III) oxide from a mixture of these two oxides.

[3]

6a
6 marks

Transition elements are found in the middle block of the Periodic Table.

Chromium has several isotopes. Manganese has only one isotope.

(i) State what is meant by the term isotopes.

 [2]

(ii) State the nucleon number of manganese.

  [1]

(iii) Complete the table to show the number of protons, neutrons and electrons in a Cr24523+ ion.

protons

neutrons

electrons

 

 

 

[3]

6b
4 marks

One chemical property of transition elements is that they form coloured compounds.

(i) Give the colours of the following hydrated salts.

●   hydrated copper(II) sulfate ...............................................

●   hydrated cobalt(II) chloride ................................................

[2] 

(ii) Extended Tier Only

State two other chemical properties of transition elements.

[2]

6c
2 marks

Transition elements and Group I elements are metals. They share many physical properties including the ability to:

  • conduct electricity

  • be hammered into shape.

(i) Extended Tier Only

Explain why transition elements and Group I elements conduct electricity.

 [1]

(ii) State the property that describes a material which can be hammered into shape.

   [1]

6d
2 marks

Transition elements and Group I elements differ in other physical properties. Transition elements are harder and stronger than Group I elements.

Describe two other ways in which the physical properties of transition elements differ from Group I elements.

7a
2 marks

The table shows the melting points of four elements.

element

melting point / °C

W

1538

X

115

Y

63

Z

3550

A student uses the melting points alone to conclude that Z is a metal and that Y is a non-metal.

Both conclusions are wrong.

Explain, for each element, why the melting point led the student to the wrong conclusion.

7b
2 marks

The student wants better evidence that an element is a metal.

State one measurement they could make, other than melting point or electrical conductivity.

State the result they would expect for a metal.

7c
1 mark

Suggest why electrical conductivity when solid was excluded from part (b).

8a
3 marks

Metal M was reacted separately with three different reagents.

The table shows the products formed in each reaction.

reaction

products

1

an oxide of M and hydrogen

2

a chloride of M and hydrogen

3

an oxide of M only

Identify the reagent used in each reaction.

8b
1 mark

In a fourth reaction, metal M formed a hydroxide of M and hydrogen.

Name the reagent used in this reaction.

8c
1 mark

Three of these four reactions of metal M produce hydrogen.

The reaction with oxygen does not.

Explain why.

9a
4 marks

A student writes three statements about metals.

1

All metals conduct electricity

2

All metals are hard

3

All metals have a high density

Two of these statements are wrong.

Identify the two wrong statements.

For each one, name a metal that shows it is wrong.

9b
1 mark

Rewrite statement 2 so that it is correct.

9c
2 marks

All three of the student's statements describe physical properties.

State two chemical properties that are true of most metals.

10a
2 marks

Chromium reacts with steam when it is heated strongly.

One product is chromium(III) oxide, Cr2O3.

Write the balanced symbol equation for this reaction.

10b
2 marks

Chromium also reacts with oxygen when it is heated.

Chromium(III) oxide is the only product.

Write the balanced symbol equation for this reaction.

10c
1 mark

A student is given a balanced symbol equation for a reaction of chromium, but is not told which reagent was used.

State how the student could tell from the equation alone whether chromium had reacted with steam or with oxygen.

11a
2 marks

Magnesium has a lower density than aluminium.

Suggest why the bodies of aircraft are made from aluminium rather than from magnesium.

11b
2 marks

Titanium is a strong metal with a low density. It does not react with body fluids.

Replacement hip joints are made from titanium.

Suggest two reasons why titanium is suitable for this use.

11c
1 mark

Explain why a replacement hip joint is not made from iron.

11d
1 mark

Gold does not corrode inside the body.

Suggest why hip joints are not made from gold.

12a
2 marks

The table shows some properties of aluminium and copper.

metal

density in g/cm3

relative electrical conductivity

relative strength

aluminium

2.70

61

1.0

copper

8.96

100

1.3

Use the table to explain why the body of an aircraft is made from aluminium rather than from copper.

12b
2 marks

Use the table to explain why the electrical wiring inside a house is made from copper rather than from aluminium.

12c
1 mark

Suggest one property, not shown in the table, that would be important when choosing a metal to make a water pipe.

12d
2 marks

A manufacturer wants to choose one of these two metals for the base of a saucepan.

Explain why the table does not contain enough information to make this choice.

13a
2 marks

The frames of windows in modern buildings are often made from aluminium.

Suggest two properties of aluminium that make it suitable for window frames.

13b
2 marks

Window frames are not usually made from iron.

Explain why iron is unsuitable for making window frames.

13c
1 mark

Aluminium is a good conductor of electricity.

Suggest why this property is not a reason for using aluminium to make window frames.

13d
2 marks

Aluminium is used to make food containers as well as window frames.

Explain why the same property of aluminium is useful in both of these very different uses.

14a
2 marks

A company is designing a lightweight ladder that will be carried to building sites and left outdoors.

State two properties the metal used to make the ladder should have.

14b
2 marks

The company chooses aluminium rather than copper for the ladder.

Explain why aluminium is the better choice.

14c
1 mark

The ladder is left outdoors but does not need to be painted.

Explain why the aluminium ladder does not need to be painted.

14d
1 mark

Suggest one disadvantage of making the ladder from aluminium rather than from steel.

15a
2 marks

Aluminium is used in the manufacture of aircraft because of its low density.

Explain why a low density is important for a metal used to build an aircraft.

15b
2 marks

The strength of the metal is also important when choosing a metal to build an aircraft.

Explain why strength is important as well as low density.

15c
2 marks

Aircraft bodies are made from an alloy of aluminium rather than from pure aluminium.

Suggest two reasons why an alloy is used.

15d
1 mark

The body of an aircraft is made from aluminium alloy, but the landing gear is made from steel.

Suggest why steel is used for the landing gear.

16a
3 marks

Cutlery is made from stainless steel rather than from pure iron.

i) State two properties of stainless steel that make it suitable for making cutlery.

[2]

ii) Explain why one of these properties is particularly important for a knife blade.

[1]

16b
2 marks

Stainless steel is also used to make kitchen sinks.

Suggest two reasons why stainless steel is suitable for making a kitchen sink.

16c
2 marks

Surgical instruments are made from stainless steel. They are heated to high temperatures to sterilise them and are then used again.

A manufacturer suggests making surgical instruments from brass instead.

Suggest two reasons why brass would be less suitable than stainless steel for making surgical instruments.

17a
2 marks

Solder is an alloy of tin and lead.

The table shows the melting points of tin, lead and solder.

substance

melting point / °C

tin

232

lead

327

solder

183

i) State the melting point of solder.

[1]

ii) Describe how the melting point of solder compares with the melting points of the two pure metals it contains.

[1]

17b
3 marks

Solder is used to join electrical components to a circuit board.

i) Describe how solder is used to join two electrical components together.

[2]

ii) Suggest why solder is more suitable for this job than pure lead would be.

[1]

17c
3 marks

Lead is poisonous. Modern solder contains tin and silver instead of tin and lead.

Tin-silver solder melts at 221 °C.

i) Suggest one advantage of using tin-silver solder rather than tin-lead solder.

[1]

ii) Suggest one disadvantage of using tin-silver solder rather than tin-lead solder for joining electrical components.

[2]

18a
1 mark

An iron nail is coated with a thin layer of zinc.

A door handle is made from brass, which contains copper and zinc.

State which of these two objects is made from an alloy.

18b
3 marks

Explain, by referring to both the nail and the door handle, why only one of them is made from an alloy.

18c
3 marks

i) State one property of brass that makes it suitable for a door handle.

[1]

ii) Suggest two reasons why pure copper would be less suitable than brass for a door handle.

[2]

19a
2 marks

The table shows the composition and the hardness of three different types of brass.

brass

percentage of copper

percentage of zinc

hardness

A

95

5

low

B

70

30

medium

C

60

40

high

Use the table to explain why brass cannot be represented by a chemical formula.

19b
3 marks

i) Describe how the hardness of brass changes as the percentage of zinc increases.

[1]

ii) Ship fittings must not bend or dent when they are struck by waves.

Suggest which brass, A, B or C, is the most suitable for making ship fittings.

Give a reason for your choice.

[2]

19c
3 marks

A fourth type of brass contains 85% copper.

i) Deduce the percentage of zinc in this brass.

[1]

ii) Predict how the hardness of this fourth brass compares with the hardness of brass A.

Give a reason for your prediction.

[2]

1a
3 marks

The list shows the names of some metals.

 calcium

copper

iron

magnesium

silver 

zinc

i) Identify the metal from the box that burns with a bright white flame.

[1]

ii) In the Earth, metals are found either in ores or as uncombined elements. Explain which metal from the box is most likely to be found as an uncombined element.

[2]

1b
4 marks

i) Which metal or metals from the list in part (a) will react readily in oxygen?

[2]

ii) Give an equation to show a metal reacting with oxygen. Include state symbols.

[2]

1c
4 marks

Extended Only

The diagram shows the arrangement of the particles in a pure metal.

screen-shot-2022-10-14-at-14-59-52

Metals are often made into alloys to make them harder.

Explain why alloys are harder than pure metals.

Draw a diagram to support your answer.

1d
4 marks

Complete the table by naming two alloys and giving the elements used to make each alloy.

Alloy name

Elements used to make alloy

 

 

 

 

2a
2 marks

Tungsten is a useful metal. It has the chemical symbol W.

One method of extracting tungsten involves heating a tungsten compound, WO3, with hydrogen. Water is also produced. Write the balanced symbol equation for this reaction.

2b
2 marks

Identify what has been reduced. Give a reason for your answer.

2c
3 marks

Extended Only

Tungsten alloyed with nickel and copper can be used to make protective covers for electrical sensors and missile guidance systems. Explain why this alloy is stronger than pure titanium. 

2d
4 marks

Separate: Chemistry and Extended Only

An ore of tungsten is Scheelite. The composition of this ore is 13.9% of calcium, 63.9% of tungsten and the remainder is oxygen. Calculate the empirical formula for this ore of tungsten.

3a
2 marks

Steel is formed from iron and carbon and is widely used in the construction industry.

i) Explain why steel alloys are used in preference to iron.

[1]

ii) State a use of stainless steel.

[1]

3b
4 marks

Extended Only

Both iron and steel have typical metallic structures - a lattice of positive ions and a sea of electrons.

i) Explain why iron and steel have high melting points.

[2]

ii) Explain why, when a force is applied to a piece of steel, it does not break but changes its shape.

[2]

3c
1 mark

Brass is an alloy of two metals, copper and zinc.

Which statement is correct?

Tick one box.

Brass dissolves fully in hydrochloric acid

 

 

 

Brass has a chemical formula of CuZn

 

 

 

Brass is formed by a chemical reaction between two metals 

 

 

 

One of the metals in the alloy will dissolve in dilute hydrochloric acid

 

3d
3 marks

Separate: Chemistry and Extended Only

Acid digestion is a method used to dissolve metals into a solution which can then be analysed to determine the composition of the metal.

A 3.00 g sample of an aluminium alloy was reacted with an excess of concentrated nitric acid. The resulting mixture was made up to 250 cm3 with distilled water and analysed. The concentration of aluminium ions in the 250 cm3 solution was found to be 0.36 mol/dm3.

Calculate the percentage composition by mass of aluminum in the 3.00 g sample of aluminum alloy.

[Ar (Al) = 27]

4a
4 marks

This question is about metals and non-metals.

Compare the properties of metals and non-metals.

4b
1 mark

The Group I metals exhibit some properties that the majority of metals do not share.

Give one example of a property of Group I metals that is different from most other metals.

4c
4 marks

For each of the metals below, complete the table to identify a use of the metals and state the most important property of the metal that makes it suitable for that use.

Metal

Use

Most important property

Aluminium

 

 

Copper

 

 

4d
4 marks

Extended Only

An aluminium alloy containing 0.7% magnesium and 0.4% silicon by mass is used for making masts for sailing boats.

Calculate the number of moles of magnesium and silicon present in a mast with a mass of 17 kg.

[Ar (Mg) = 24;      Ar (Si) = 28]

5a
2 marks

Some metals react with cold water.

Give the balanced symbol equation for the reaction of calcium reacting with water. Include state symbols.

5b
3 marks

Separate: Chemistry and Extended Only

Using oxidation numbers, show that calcium is oxidised during the reaction with water.

5c
3 marks

A student added 20 cm3 of dilute hydrochloric acid to two boiling tubes. To one of the boiling tubes they added a small piece of calcium and to the other they added a small piece of magnesium.

State two observations that the student would make and how the observations would differ between the two boiling tubes.

5d
3 marks

The student had added the exact amount of magnesium required to react with the hydrochloric acid used. After carrying out the experiment, the student accidentally added some more magnesium. The student was surprised that the extra magnesium still reacted although the reaction was a lot slower. 

Explain these observations. Include an equation in your answer.

6a
3 marks

The table shows some properties of four substances.

substance

conducts electricity when solid

conducts electricity when molten

malleable or brittle

A

yes

yes

malleable

B

no

yes

brittle

C

no

no

brittle

D

yes

not measured

brittle

Identify the substance that is a metal.

Give two pieces of evidence from the table to support your answer.

6b
2 marks

Substance D conducts electricity when solid.

Explain why substance D cannot be a metal.

6c
2 marks

A student says the table shows that substance C is a non-metal element.

Explain why the data in the table cannot show this.

6d
1 mark

Suggest the identity of substance D.

7a
3 marks

The table shows some properties of four metals.

metal

density in g/cm3

electrical conductivity

resistance to corrosion

J

2.7

good

poor

K

8.9

very good

poor

L

2.7

poor

good

M

11.3

poor

poor

Identify the metal that is most suitable for making overhead electrical cables.

Use the table to justify your answer.

7b
2 marks

Metal K is the best conductor of electricity in the table, but it is not suitable for overhead electrical cables.

Explain why.

7c
2 marks

Identify the metal that is most suitable for making food containers.

Explain your choice.

7d
1 mark

Explain why metal L would be unsuitable for electrical wiring, even though it resists corrosion.

8a
2 marks

A student is asked why aluminium is used to make food containers.

The student answers that aluminium has a low density.

Explain why this is not the main reason for this use.

State the property that is the main reason.

8b
2 marks

The same student is asked why copper is used for electrical wiring.

The student answers that copper is malleable.

Explain why malleable is not the property needed here.

State the property that is needed.

8c
2 marks

The student is then asked why aluminium is used in the manufacture of aircraft.

The student answers that aluminium resists corrosion.

Resistance to corrosion is useful in an aircraft.

Explain why low density is nevertheless the more important reason for this use.

9a
3 marks

Overhead electrical cables are made from aluminium.

The electrical wiring inside a building is made from copper.

Copper is a better conductor of electricity than aluminium.

Suggest why a different metal is chosen for each of these two situations.

9b
1 mark

An engineer suggests using a thicker aluminium wire inside buildings instead of copper, so that it carries the same current.

Suggest one disadvantage of doing this.

9c
1 mark

Silver conducts electricity better than copper.

Suggest why silver is not used for either overhead cables or household wiring.

9d
1 mark

State the property, other than conducting electricity, that a metal needs for both overhead cables and household wiring.

10a
2 marks

Aluminium is used to make food containers because it resists corrosion.

State one other large-scale use of aluminium.

Explain, in terms of its properties, why aluminium is suitable for that use.

10b
1 mark

State a property of aluminium that would not be a reason for the use you gave above.

10c
2 marks

A student says that aluminium is suitable for every use because it has a low density and it resists corrosion.

Explain why the student is wrong. Use one example in your answer.

10d
1 mark

Suggest why aluminium is not used to make the cutting edge of a knife.

11a
2 marks

Aluminium is used to make food containers because it resists corrosion.

Explain why resistance to corrosion is especially important for a metal that is in contact with food.

11b
2 marks

Food cans made from steel have to be coated on the inside.

Aluminium foil used to wrap food is not coated.

Explain why.

11c
2 marks

Extended Tier Only

Aluminium is higher than iron in the reactivity series.

Despite this, aluminium objects left outdoors last far longer than iron objects.

Explain why.

11d
2 marks

Aluminium foil can be rolled extremely thin and still protect food.

Suggest two properties of aluminium that make this possible.

12a
3 marks

The table shows some properties of three alloys, P, Q and R.

alloy

density / g per cm3

strength

resistance to corrosion

relative cost

P

2.7

low

good

low

Q

4.5

high

good

high

R

7.9

high

poor

low

A manufacturer needs an alloy for a bicycle frame. The frame must be light and strong, and must not corrode when the bicycle is left outside.

Suggest which alloy, P, Q or R, is the most suitable.

Give two reasons for your choice.

12b
2 marks

Give two disadvantages of using alloy Q for bicycle frames.

12c
2 marks

Alloy R is used for the frameworks of large bridges.

Suggest why alloy R is suitable for this use even though it has poor resistance to corrosion.

12d
2 marks

A manufacturer makes several different versions of alloy P, each containing different proportions of the same metals.

Suggest why the manufacturer does this.

13a
1 mark

Copper can be alloyed with zinc, with nickel or with tin.

The table shows the atomic radius of each of these four metals.

metal

atomic radius / nm

copper

0.128

zinc

0.134

nickel

0.125

tin

0.151

State which of zinc, nickel and tin has the atomic radius closest to that of copper.

13b
3 marks

Extended Tier Only

Each of the three alloys contains the same percentage of the second metal.

Predict which of the three alloys, copper with zinc, copper with nickel or copper with tin, would be the hardest.

Explain your prediction in terms of the sizes of the atoms.

13c
3 marks

Extended Tier Only

An alloy of copper containing a small percentage of nickel is only slightly harder than pure copper.

Explain why, using the data in the table.

13d
2 marks

Coins are made from an alloy of copper and nickel rather than from an alloy of copper and tin.

Suggest two reasons why an alloy of copper and nickel might be chosen for coins even though it is less hard.

14a
2 marks

Extended Tier Only

The pins of an electrical plug are made from brass, which is an alloy of copper and zinc.

The pins must conduct electricity well.

State what is present in brass that allows it to conduct electricity.

Explain how this allows a current to flow.

14b
3 marks

Extended Tier Only

A student says that because the layers of atoms in brass cannot slide over each other easily, brass cannot conduct electricity.

Explain why the student is wrong.

14c
3 marks

The table shows the electrical conductivity of copper, zinc and brass, given as a percentage of the conductivity of copper.

metal

electrical conductivity / % of copper

copper

100

zinc

27

brass

28

i) State which of the three metals in the table has the lowest electrical conductivity.

[1]

ii) Suggest why the pins of a plug are made from brass even though copper conducts electricity better.

[2]

14d
2 marks

The wiring inside a house is made from copper rather than from brass. Several hundred metres of wire are needed to wire a house.

Suggest why brass would be unsuitable for the wiring inside a house.