Chemical Change & Rate of Reaction (Cambridge (CIE) IGCSE Chemistry): Multiple Choice Questions

Exam code: 0620 & 0971

13 hours113 questions
1
1 mark

The rate of a reaction was monitored by recording the volume of gas produced every 5 seconds.

TIUbhf1t_q1

What is the mean rate of reaction in the first 10 seconds of the reaction, in cm3/s?

  • 2.9

  • 3.0

  • 3.5

  • 2.5

2
1 mark

Which of the following processes represents a physical change?

  • Acid base neutralisation

  • Metal displacement reactions

  • Boiling ethanol

  • Combustion of magnesium

3
1 mark

Physical and chemical changes are different processes. Which of the following rows correctly identifies characteristics of each one?

  • chemical change - no new substance formed
    physical change - change of state

  • chemical change - no new substance formed
    physical change - involves electron transfer

  • chemical change - new substance formed
    physical change - involves electron transfer

  • chemical change - new substance formed
    physical change - change of state

4
1 mark

A student was measuring the rate of reaction using the apparatus in the diagram.

ms3-6-1-easy-cie-igcse-chemistry

What reaction is the student studying?

  • CaO + H2SO4 → CaSO4 + H2O

  • Mg(OH)2 + 2HCl → MgCl2 + 2H2O

  • Fe + H2SO4 → FeSO4 + H2

  • KCl + AgNO3 → KNO3 + AgCl

5
1 mark

A student was investigating the rate of reaction between iron and a solution of sulfuric acid. Two experiments were performed, P and Q, in which the volume of hydrogen was recorded at regular intervals.

q5-6-1-easy-cie-igcse-chemistry

Which change could explain the difference in results between P and Q?

  • The student added a catalyst in P.

  • Larger pieces of iron were used in P.

  • Less concentrated acid was used in P.

  • Larger quantities of both reactants are used P.

6
1 mark

Which changes are physical changes?

  1. melting ice to form water

  2. burning hydrogen to form water

  3. adding sodium to water

  4. boiling water to form steam

  • 1 and 2

  • 1 and 4

  • 2 and 3

  • 3 and 4

7
1 mark

Which row identifies a chemical change and a physical change?

chemical change

physical change  

A

boiling ethanol 

burning ethanol

B

burning ethanol

evaporating ethanol 

C

dissolving ethanol in water

burning ethanol 

D

evaporating ethanol 

dissolving ethanol in water 

    8
    1 mark

    Which statement about rate of reaction is correct?

    • Catalysts increase the time for the reaction to be completed.

    • Decreasing particle size increases the rate of reaction.

    • Decreasing temperature increases the rate of reaction.

    • Rate of reaction decreases as the concentration increases.

    9
    1 mark

    A student investigates the rate of reaction between aqueous sodium thiosulphate and aqueous hydrochloric acid by measuring the time taken for a precipitate to obscure a cross underneath the beaker.

    Which statement is correct for the reaction?

    • The precipitate will be formed faster if ice is placed in contact with the beaker.

    • The precipitate will be formed faster if 10.0 cm3 of water are added to the aqueous sodium thiosulphate.

    • The precipitate will be formed slower if a catalyst is added to the reaction mixture.

    • The precipitate will be formed faster if drops of concentrated hydrochloric acid are added to the reaction mixture.

    10
    1 mark

    A student investigates the effect of temperature on the rate of a reaction.

    In Experiment 1, the reaction is performed at 10 °C. In Experiment 2, the reaction is repeated at 20 °C. All other conditions stay the same.

    Which graph shows the results for the volume of gas produced against time?

    Four graphs labelled A to D show volume of gas over time for two experiments. A and C: Experiment 1 above 2. B and D: Experiment 2 above 1.
      11
      1 mark

      Which process is a physical change?

      • cracking of an alkane

      • hydration of ethene

      • fractional distillation of petroleum

      • thermal decomposition of calcium carbonate

      12
      1 mark

      Which pair of changes are both physical changes?

      • melting candle wax and dissolving sugar in water

      • burning candle wax and dissolving sugar in water

      • melting candle wax and rusting iron

      • heating limestone and freezing water

      13
      1 mark

      Three statements about chemical changes are shown.

      1 One or more new substances are formed.

      2 The change is always easy to reverse.

      3 The total mass of the products equals the total mass of the reactants.

      Which statements are correct?

      • 1, 2 and 3

      • 1 and 2 only

      • 1 and 3 only

      • 2 and 3 only

      14
      1 mark

      Which observation is evidence that a chemical change has taken place?

      • A green solid turns black and gives off a gas that turns limewater milky.

      • A grey solid turns to a purple vapour when it is warmed.

      • A white solid disappears when it is stirred into water.

      • A blue solution becomes paler when more water is added to it.

      15
      1 mark

      Marble chips react with dilute hydrochloric acid. Carbon dioxide is given off.

      CaCO3 (s) + 2HCl (aq) → CaCl2 (aq) + H2O (l) + CO2 (g)

      A student uses a balance to follow the rate of this reaction.

      Which measurement should the student record at regular time intervals?

      • the mass of the flask and its contents

      • the mass of the empty flask

      • the volume of acid measured out at the start

      • the temperature of the laboratory

      16
      1 mark

      Extended Only

      Two gas jars contain the same gas at the same temperature. Jar X contains more particles in the same volume than jar Y.

      Which statement about the particles in jar X is correct?

      • They collide with each other more frequently than the particles in Y.

      • They have a higher average kinetic energy than the particles in Y.

      • They are further apart than the particles in Y.

      • They need less energy to react than the particles in Y.

      1
      1 mark

      A student was investigating the rate of reaction between a solid base and a solution of sulfuric acid. Two experiments were performed, S and T, in which the mass of the reaction flask was recorded as shown in the graph.

      f4nlb5-v-q1-6-1-medium-cie-igcse-chemistry

      Which of the following changes could explain the difference in results between S and T?

      • The sulfuric acid is less concentrated in T.

      • The sulfuric acid is more concentrated in T.

      • A higher temperature is used in S.

      • Larger sized particles are used in T.

      2
      1 mark

      Which graph correctly shows the effect of increasing the temperature on the rate of reaction between magnesium and sulfuric acid in which neither reactant runs out?

      q2-6-1-medium-cie-igcse-chemistry
      • Option A

      • Option B

      • Option C

      • Option D

      3
      1 mark

      A student reacts a metal carbonate with nitric acid and measures the volume of carbon dioxide gas released at regular intervals. The results of the experiment are shown in the graph.

      q3-6-1-medium-cie-igcse-chemistry

      Between which two measurements was the reaction the fastest?

      • 0 and 2 minutes

      • 2 and 4 minutes

      • 4 and 6 minutes

      • 10 and 12 minutes

      4
      1 mark

      Magnesium metal reacts with an excess of hydrochloric acid solution to form magnesium chloride and hydrogen:

      Mg (s) + 2HCl (aq) → MgCl2 (aq) + H2 (g)

      Which of the following will not increase the rate of this reaction?

      • Increase the temperature of the acid

      • Increase the surface area to volume ratio of the pieces of magnesium

      • Increase the concentration of the hydrochloric acid

      • Increase the volume of hydrochloric acid solution used

      5
      1 mark

      Catalysts are often used in chemical reactions.

      Which letter represents two correct features of catalysts?

      • Feature 1 - Lower activation energy for the reaction
        Feature 2 - More products made in total

      • Feature 1 - Alternative pathway for the reaction is provided
        Feature 2 - Not used up over the course of the reaction

      • Feature 1 - Makes industrial processes cheaper
        Feature 2 - Metal catalysts are cheap to buy

      • Feature 1 - Reduce the overall energy change of the reaction
        Feature 2 - Can be present in biological systems as enzymes

      6
      1 mark

      The diagram shows an experiment to measure the rate of a chemical reaction

      Diagram of an experiment setup with dilute hydrochloric acid reacting with metal in a flask, gas collected in a submerged measuring cylinder via a tube.

      Which change decreases the rate of reaction?

      •  adding water to the flask

      •  heating the flask during the reaction

      • using more concentrated acid

      • using powdered metal

      7
      1 mark

      Extended Only

      Which row describes the effect of increasing concentration and increasing temperature on the collisions between reacting particles?

      increasing concentration

      increasing temperature

      A

      more collisions per second only

      more collisions per second only

      B

      more collisions per second only

      more collisions per second and more collisions with sufficient energy to react

      C

      more collisions per second and more collisions with sufficient energy to react

      more collisions per second only

      D

      more collisions per second and more collisions with sufficient energy to react

      more collisions per second and more collisions with sufficient energy to react

        8
        1 mark

         Excess magnesium ribbon is reacted with a fixed volume of hydrochloric acid and the volume of gas given off over time is measured. 

        The results of two different experiments are shown.

        Graph showing volume of gas over time. Reaction 1 reaches a higher volume than Reaction 2, with both reactions plateauing at different levels.

        Which statement explains the differences between the results of the two experiments?

        • Reaction 1 uses a catalyst.

        • The acid used is twice as concentrated in reaction 1.  

        • The magnesium ribbon is in smaller pieces in reaction 2.

        • The temperature is higher in reaction 2. 

        9
        1 mark

        Extended Only

        Which statements explain why increasing the concentration of a reactant increases the rate of reaction?

        1. It increases the collision rate of particles. 

        2. It lowers the activation energy. 

        3. A greater proportion of the colliding molecules have the required activation energy. 

        4. There are more particles per unit volume.

        • 1 and 3

        • 1 and 4

        • 2 and 3

        • 2 and 4

        10
        1 mark

        In each of these four processes a change is made and then reversed, so that the original substance is obtained again.

        In which process does no reaction take place at either stage?

        • Water is frozen to ice, then the ice is melted.

        • Blue hydrated copper(II) sulfate is heated to a white solid, then water is added to the white solid.

        • Pink cobalt(II) chloride is warmed until it turns blue, then damp air is passed over it.

        • Calcium oxide is added to water, then the product is heated strongly.

        11
        1 mark

        A student carries out two changes.

        change 1: solid wax is melted

        change 2: magnesium is burned in air

        Which row correctly describes what happens to the particles in each change?

        change 1

        change 2

        A

        the particles are rearranged into new substances

        the particles are rearranged into new substances

        B

        the particles are rearranged into new substances

        the same particles are arranged differently

        C

        the same particles are arranged differently

        the particles are rearranged into new substances

        D

        the same particles are arranged differently

        the same particles are arranged differently

          12
          1 mark

          Solid calcium chloride is stirred into water. All of the solid dissolves and the temperature of the water rises from 19 °C to 27 °C.

          Which row gives the type of change and the correct reason for it?

          type of change

          reason

          A

          chemical

          the temperature of the water rises

          B

          chemical

          the calcium chloride is no longer visible

          C

          physical

          no energy is transferred between the calcium chloride and the water

          D

          physical

          the calcium chloride can be recovered unchanged by evaporating the water

            13
            1 mark

            Solid carbon dioxide is left in a warm room. It turns directly into carbon dioxide gas without forming a liquid.

            Which row gives the type of change and the correct reason for it?

            type of change

            reason

            A

            chemical

            a gas is produced

            B

            chemical

            the covalent bonds inside the carbon dioxide molecules break

            C

            physical

            the carbon dioxide molecules move much further apart

            D

            physical

            the covalent bonds inside the carbon dioxide molecules break

              1
              1 mark

              In each of these four experiments a white solid appears in a colourless solution.

              In which experiment is the change physical?

              • A hot saturated solution of potassium nitrate is cooled.

              • Aqueous barium nitrate is added to aqueous sodium sulfate.

              • Carbon dioxide is bubbled through limewater.

              • Aqueous silver nitrate is added to aqueous sodium chloride.

              2
              1 mark

              Each of these four changes produces a gas.

              In which change is no new substance formed?

              • Liquid air is warmed and nitrogen boils off.

              • Zinc is added to dilute hydrochloric acid.

              • Solid sodium hydrogencarbonate is heated.

              • Aqueous hydrogen peroxide is mixed with manganese(IV) oxide.

              3
              1 mark

              A chemical change takes place inside a sealed container.

              1 the total mass of the substances in the container

              2 the total number of atoms in the container

              3 the total number of molecules in the container

              Which quantities are always unchanged by a chemical change in a sealed container?

              • 1, 2 and 3

              • 1 and 2 only

              • 1 and 3 only

              • 2 and 3 only

              4
              1 mark

              Blue hydrated copper(II) sulfate crystals are heated. Steam is given off and a white solid is left behind.

              When water is added to the white solid it turns blue again.

              Which row gives the type of change when the crystals are heated, and the correct reason for it?

              type of change

              reason

              A

              physical

              the change can be reversed by adding water

              B

              physical

              water is only driven out from between the crystals

              C

              chemical

              the copper(II) sulfate is broken down into its elements

              D

              chemical

              a substance with a different formula is formed

                5
                1 mark

                A student was investigating the rate of reaction between acid and metals. The experimental set-up is shown below.

                q1-6-1-hard-cie-igcse-chemistry

                Which test tube would give the quickest reaction?

                • Option A

                • Option B

                • Option C

                • Option D

                6
                1 mark

                The graph shows the results of two separate reaction rate investigations using excess calcium carbonate and sulfuric acid.

                t5dT2jWN_q2-6-1-hard-cie-igcse-chemistry

                Which statement explains the difference between the results?

                • The temperature was higher in experiment 2.

                • Experiment 2 was allowed more time to react.

                • Same volume of a more concentrated acid was used in experiment 2.

                • More calcium carbonate was used in experiment 2.

                7
                1 mark

                Which of the following statements explains how increasing temperature increases the rate of a reaction?

                • Increasing the temperature increases the kinetic energy of the particles so there are a smaller number of successful collisions.

                • Increasing the temperature increases the kinetic energy of the particles so there are a larger number of unsuccessful collisions.

                • Increasing the temperature decreases the kinetic energy of the particles so there are a larger number of successful collisions.

                • Increasing the temperature increases the kinetic energy of the particles so there are a larger number of successful collisions.

                8
                1 mark

                Which of the following statements best describes the activation energy of a reaction?

                • The minimum energy released when colliding particles react.

                • The minimum energy required for particles to react when they collide.

                • The maximum energy required for particles to react when they collide.

                • The maximum energy released when colliding particles react.

                9
                1 mark

                Which of the following statements correctly describes the effects of increasing concentration on the rate of a reaction?

                • Increasing the concentration increases the kinetic energy of the particles, resulting in more successful collisions between particles per unit time.

                • Increasing the concentration increases the rate of reaction as there is more space between particles.

                • Increasing the concentration increases the rate of reaction as there are more collisions between particles per unit time.

                • Increasing the concentration increases the rate of reaction as there are more collisions between particles at the beginning of the reaction.

                10
                1 mark

                A student investigates the rate of reaction between sodium carbonate granules and dilute hydrochloric acid.

                The investigation is carried out twice, as Experiment 1 and Experiment 2. The volume of acid, the temperature, and the mass of the sodium carbonate granules are kept the same in both experiments.

                Volume of gas vs time. Both start at 0. Experiment 2 rises more steeply and levels off sooner. Both reach same final volume.

                Which row correctly compares the concentration of the acid (C), the average kinetic energy of the particles (KE), and the frequency of successful collisions in the two experiments?


                concentration of acid

                average kinetic energy of particles

                frequency of successful collisions

                A

                C2​ > C1​

                KE1​ = KE2​

                greater in experiment 2

                B

                C2​ > C1

                KE2​ > KE1​

                greater in experiment 2

                C

                C1​ > C2​

                KE1​ = KE2

                greater in experiment 1

                D

                C1​ > C2

                KE2 ​> KE1

                greater in experiment 1