Why can the suvat formulae only be used when the acceleration is constant?

The suvat formulae are derived from a velocity-time graph drawn as a straight line , and a straight line is exactly what constant acceleration gives. Every step of the derivation, the gradient and the areas alike, depends on that straight line. If the acceleration changes, the graph is a curve, the derivation no longer holds, and the motion has to be split into separate stages that each have constant acceleration.

True or False? A journey in which a car accelerates uniformly and then brakes to a stop can be handled by applying a single suvat formula to the journey as a whole.

False. The suvat formulae require the acceleration to be constant , and this journey has two different constant accelerations, so the formulae must be applied to each stage separately . The two stages are linked by the velocity between them: the final velocity of the accelerating stage is the initial velocity of the braking stage.

A constant-acceleration problem gives you only two of the five suvat quantities, so no single formula can be substituted into. What can you do instead?

Write down two of the suvat formulae and solve them as a pair of simultaneous equations . The five formulae are five different relations between the same five quantities, so any two of them containing your unknowns give two independent equations in those unknowns. Two unknowns need two equations, and a single formula can only ever supply one.

A LevelMathsAQAMechanicsFlashcardsKinematicsConstant Acceleration in 1D

Constant Acceleration in 1D (AQA A Level Maths: Mechanics): Flashcards

Exam code: 7357

1/14

0Still learning

Know0

FrontDeriving the suvat Formulas
In the suvat formulae for motion in a straight line, what does each of the five letters stand for?
BackDeriving the suvat Formulas
The five quantities in the suvat formulae are:
$s$ , the displacement from the starting position
$u$ , the initial velocity
$v$ , the final velocity
$a$ , the acceleration
$t$ , the time taken
BackDeriving the suvat Formulas
Sign up to unlock flashcards
Join for free to unlock a full flashcard set, track what you know,
and turn revision into real progress.
BackDeriving the suvat Formulas
Displacement, initial velocity, final velocity and acceleration are all vectors, so any of them can be negative, meaning the quantity points opposite to whichever direction has been chosen as positive.
So $u = - 6 {m s}^{- 1}$ describes an object that starts out moving in the negative direction at a speed of $6 {m s}^{- 1}$ .
Time is the one scalar, so a negative $t$ means an instant before the moment chosen as $t = 0$ , where the formulae still hold, letting you work backwards to before you started watching.

Was this flashcard helpful?

Cards in this collection (14)

In the suvat formulae for motion in a straight line, what does each of the five letters stand for?
The five quantities in the suvat formulae are:
- $s$ , the displacement from the starting position
- $u$ , the initial velocity
- $v$ , the final velocity
- $a$ , the acceleration
- $t$ , the time taken
True or False?
In the suvat formulae, $s$ stands for the total distance the object has travelled.
False.
$s$ is the displacement from the starting position, not the distance travelled.
An object that moves away and comes back to where it started has $s = 0$ , however far it has actually travelled.
Which of the five suvat quantities can take a negative value, and what does a negative value mean?
Displacement, initial velocity, final velocity and acceleration are all vectors, so any of them can be negative, meaning the quantity points opposite to whichever direction has been chosen as positive.
So $u = - 6 {m s}^{- 1}$ describes an object that starts out moving in the negative direction at a speed of $6 {m s}^{- 1}$ .
Time is the one scalar, so a negative $t$ means an instant before the moment chosen as $t = 0$ , where the formulae still hold, letting you work backwards to before you started watching.
Why can the suvat formulae only be used when the acceleration is constant?
The suvat formulae are derived from a velocity-time graph drawn as a straight line, and a straight line is exactly what constant acceleration gives. Every step of the derivation, the gradient and the areas alike, depends on that straight line.
If the acceleration changes, the graph is a curve, the derivation no longer holds, and the motion has to be split into separate stages that each have constant acceleration.
On a velocity-time graph the velocity changes in a straight line from $u$ to $v$ over a time $t$ . Taking the area under the graph as a single shape, which shape is it, and which suvat formula does its area give?
The area under the graph is a trapezium with parallel sides of length $u$ and $v$ , a distance $t$ apart.
Its area gives:
$s = \frac{1}{2} (u + v) t$
which is the suvat formula connecting $s$ , $u$ , $v$ and $t$ .
If one of the two velocities is zero, the shape is a triangle rather than a trapezium, which is the same case with one parallel side of length zero, and the formula is unchanged.
The area under a velocity-time graph for constant acceleration can be split as a rectangle plus a triangle, or as a rectangle minus a triangle. Which suvat formula does each splitting give?
Both ways of splitting the area under the graph use a triangle of height $v - u$ , the change in velocity, on a base of $t$ .
A rectangle of height $u$ plus that triangle gives $s = u t + \frac{1}{2} (v - u) t$ , and a rectangle of height $v$ minus that triangle gives $s = v t - \frac{1}{2} (v - u) t$ .
Since $v - u = a t$ , these become:
$s = u t + \frac{1}{2} a t^{2}$
$s = v t - \frac{1}{2} a t^{2}$
The suvat formulae can also be derived using calculus. Fill in the two constants of integration:
$v = \int a d t = a t + c$
At $t = 0$ the velocity is $u$ , so $c =______$
$s = \int v d t = u t + \frac{1}{2} a t^{2} + c$
At $t = 0$ the displacement is $0$ , so $c =______$
Both constants of integration come from the values at $t = 0$ :
At $t = 0$ the velocity is $u$ , so $c = u$ , giving $v = u + a t$ .
At $t = 0$ the displacement is $0$ , so $c = 0$ , giving $s = u t + \frac{1}{2} a t^{2}$ .
The displacement is zero at the start because $s$ is measured from the starting position. Each constant is fixed by the state of the motion at the start, which is why $u$ appears in the first formula and nothing is added to the second.
Four of the five suvat formulae come straight from the velocity-time graph. Which one does not, and how is it obtained?
The formula that cannot be read off the velocity-time graph is:
$v^{2} = u^{2} + 2 a s$
It is the only one of the five that does not contain $t$ , so there is no time interval on the graph to obtain it from.
It is found instead by taking two of the other formulae and eliminating $t$ between them: rearranging $v = u + a t$ gives $t = \frac{v - u}{a}$ , and substituting that into $s = \frac{1}{2} (u + v) t$ leads to it.
In a constant-acceleration problem you know three of the five suvat quantities and want a fourth. How do you choose which of the five formulae to use?
Each of the five formulae contains four of the five quantities, so exactly one of them leaves out the quantity you neither know nor want.
Choose that one: the formula containing your three known values and the one you are looking for.
So with $u$ , $a$ and $t$ known and $s$ wanted, the quantity left out is $v$ , which points to $s = u t + \frac{1}{2} a t^{2}$ .
Constant-acceleration problems describe the values you need in words. Fill in the blanks with the suvat letter that each phrase pins down:
"… returns to its starting position …" means $______= 0$
"… initially at rest …" means $______= 0$
"… comes to rest …" means $______= 0$
The completed translations are:
"… returns to its starting position …" means $s = 0$ , because $s$ is measured from the starting position.
"… initially at rest …" means $u = 0$ .
"… comes to rest …" means $v = 0$ .
Before using the suvat formulae on a problem, why must you decide which direction counts as positive, and does it matter which direction you choose?
Until a positive direction is fixed, a value such as $u = - 6 {m s}^{- 1}$ has no meaning: the minus sign is what records the direction.
It does not matter which direction you choose, provided every quantity in the problem is measured against the same one. Choosing the direction the object starts out in, or the direction of the acceleration, usually leaves fewer negative values to handle.
True or False?
A journey in which a car accelerates uniformly and then brakes to a stop can be handled by applying a single suvat formula to the journey as a whole.
False.
The suvat formulae require the acceleration to be constant, and this journey has two different constant accelerations, so the formulae must be applied to each stage separately.
The two stages are linked by the velocity between them: the final velocity of the accelerating stage is the initial velocity of the braking stage.
A constant-acceleration problem gives you only two of the five suvat quantities, so no single formula can be substituted into. What can you do instead?
Write down two of the suvat formulae and solve them as a pair of simultaneous equations.
The five formulae are five different relations between the same five quantities, so any two of them containing your unknowns give two independent equations in those unknowns.
Two unknowns need two equations, and a single formula can only ever supply one.
A car speeding up along a straight road gives $v^{2} = 729$ from $v^{2} = u^{2} + 2 a s$ , so $v = \pm 27$ . How do you decide which sign to take?
Take the sign from the direction of travel, read against whichever direction was chosen as positive.
The car is speeding up in the direction it was already moving, so its final velocity has the same sign as its initial velocity, and taking that direction as positive gives $v = 27 {m s}^{- 1}$ .
Squaring has lost the direction, and only the situation being modelled can put it back: the negative root would describe an object moving the other way.

Sign up to unlock flashcards

By signing up you agree to our Terms and Privacy Policy

Previous:Variable Acceleration in 1DNext:Variable Acceleration in 2D