Costs, Revenue & Production (A Level) (Cambridge (CIE) A Level Economics): Flashcards

Exam code: 9708

1/56

0Still learning

Know0

  • Define the production function.

Cards in this collection (56)

  • Define the production function.

    The production function shows the relationship between the inputs used in production and the level of output produced.

  • What is true of at least one factor of production in the short run?

    In the short run, at least one factor of production is fixed, so firms increase output mainly by adjusting variable factors.

  • True or False?

    Labour and raw materials are fixed factors of production in the short run.

    False.

    Labour and raw materials are variable factors, which can be changed in the short run. Typical fixed factors include machinery, buildings and land.

  • Define marginal product (MP).

    Marginal product is the additional output produced by employing one more unit of labour.

  • If total output rises from 100 to 180 loaves when a second worker is hired, the marginal product of the second worker is __ loaves.

    If total output rises from 100 to 180 loaves when a second worker is hired, the marginal product of the second worker is 80 loaves.

  • How is average product (AP) calculated?

    Average product is calculated by dividing total product (TP) by the quantity of labour (QL):

    AP = \frac{TP}{QL}

  • Define the law of diminishing returns.

    The law of diminishing returns states that when increasing amounts of a variable factor are added to a fixed factor, the marginal product of the variable factor will eventually fall.

  • The law of diminishing returns is also called the law of __________________.

    The law of diminishing returns is also called the law of variable proportions.

  • Why does the law of diminishing returns occur?

    Diminishing returns occur because the fixed factor becomes a constraint on production. Extra workers share the same limited capital and start to get in each other's way.

  • Why does marginal product rise when the first few workers are hired?

    Marginal product rises at first because workers can specialise, which makes production more efficient.

  • True or False?

    Once diminishing returns begin, each extra worker reduces total output.

    False.

    During diminishing returns, each extra worker still increases total product, but by a smaller amount than the worker before.

  • What happens to total product once marginal product becomes negative?

    Once marginal product becomes negative, total product falls, because too many workers cause crowding and inefficiency.

  • Define fixed costs.

    Fixed costs are costs that do not change with the level of output, such as rent and insurance premiums.

  • Why do firms with high fixed costs, such as airlines, often aim to maximise output?

    Firms with high fixed costs aim to maximise output to spread their fixed costs over more units, which reduces average fixed cost per unit.

  • Define variable costs.

    Variable costs are costs that change directly with the level of production, such as raw materials and electricity used in production.

  • How is total cost (TC) calculated?

    Total cost is the sum of total fixed costs (TFC) and total variable costs (TVC):

    TC = TFC + TVC

  • How is average total cost (ATC) calculated?

    Average total cost is calculated by dividing total cost (TC) by the quantity of output (Q):

    ATC = \frac{TC}{Q}

  • Define marginal cost (MC).

    Marginal cost is the increase in total cost caused by producing one more unit of output.

  • Why can short-run marginal cost be calculated using only the change in total variable cost?

    Short-run marginal cost can be calculated as ΔTVC ÷ ΔQ because fixed costs do not change with output, so any change in total cost comes from variable costs.

  • True or False?

    In the short run, the marginal cost curve slopes upwards at every level of output.

    False.

    Marginal cost falls at first due to increasing productivity, then rises once diminishing returns set in. This gives a U-shaped MC curve.

  • Why can total cost never be zero in the short run?

    Total cost can never be zero in the short run because every firm has some fixed costs, which must be paid even when output is zero.

  • On a cost diagram, what does the vertical distance between the ATC and AVC curves represent?

    The vertical distance between the ATC and AVC curves represents average fixed cost (AFC).

  • The marginal cost curve cuts the average variable cost and average total cost curves at their _____ points.

    The marginal cost curve cuts the average variable cost and average total cost curves at their minimum points.

  • What happens to average cost when marginal cost is above it?

    When marginal cost is above average cost, average cost rises, because each extra unit costs more than the current average and pulls the average up.

  • How can a firm change its scale of production in the long run?

    Because all factors of production are variable in the long run, a firm can change its scale by expanding its factories, investing in new machinery or adopting new technologies.

  • When is a firm using the most cost-effective combination of inputs?

    A firm is using the most cost-effective combination of inputs when the marginal product per unit of cost is equal across all inputs. For each input, this is:

    \frac{\text{marginal product}}{\text{price of the factor}}

  • True or False?

    When choosing between two inputs, a firm should always choose the one with the lower price.

    False.

    A firm compares each input's additional output with its cost. It favours the input that generates the highest output relative to its cost, which may not be the cheaper one.

  • Define returns to scale.

    Returns to scale describe how output changes when all inputs increase proportionally.

  • Define increasing returns to scale.

    Increasing returns to scale occur when output increases more than proportionally to the increase in inputs.

  • When output increases in the same proportion as inputs, a firm experiences ______ returns to scale.

    When output increases in the same proportion as inputs, a firm experiences constant returns to scale.

  • True or False?

    Under decreasing returns to scale, output falls when a firm increases all of its inputs.

    False.

    Under decreasing returns to scale, output still increases, but less than proportionally to the increase in inputs.

  • Which type of returns to scale does a firm experience at its minimum efficient scale?

    At its minimum efficient scale, a firm experiences constant returns to scale.

  • What is the long-run average cost (LRAC) curve?

    The LRAC curve shows the lowest possible average cost of production at each level of output when a firm can vary all factors of production.

  • How is the long-run average cost curve derived?

    The LRAC curve is derived from a series of short-run average cost (SRAC) curves, each representing a different plant size. It touches each SRAC curve where production is most efficient for that plant size.

  • Define minimum efficient scale (MES).

    Minimum efficient scale is the lowest level of output at which a firm reaches the minimum point of its LRAC curve.

  • True or False?

    Minimum efficient scale occurs at a relatively low level of output in industries with high fixed costs.

    False.

    In industries with high fixed costs, such as car manufacturing, MES occurs at very large output levels. It occurs at relatively low output in industries with low fixed costs.

  • Define economies of scale.

    Economies of scale occur when a firm's average costs fall as its output increases in the long run.

  • A large firm that can borrow at lower interest rates than a small firm benefits from a _______ economy of scale.

    A large firm that can borrow at lower interest rates than a small firm benefits from a financial economy of scale.

  • What is a risk-bearing economy of scale?

    A risk-bearing economy of scale arises when a larger firm can spread risk across more products.

  • Define external economies of scale.

    External economies of scale are cost reductions a firm gains from the growth of the industry as a whole, rather than from its own expansion.

  • What are two sources of external economies of scale?

    Sources of external economies of scale include a larger pool of skilled labour, specialist suppliers, improved infrastructure and geographic clustering of firms.

  • Define diseconomies of scale.

    Diseconomies of scale occur when a firm's average costs rise as it becomes very large.

  • How do management diseconomies raise a large firm's average costs?

    Management diseconomies raise average costs because more layers of management lead to slower decision-making.

  • True or False?

    The law of diminishing returns explains the shape of the long-run average cost curve.

    False.

    Diminishing returns occur in the short run, when a variable factor is added to a fixed factor. The LRAC curve's shape is explained by economies and diseconomies of scale.

  • Define total revenue (TR).

    Total revenue is the total income a firm receives from selling its output. It is calculated as:

    TR = P \times Q

    where P is the price per unit and Q is the quantity sold.

  • Why is a firm's average revenue (AR) curve also its demand curve?

    The AR curve is the firm's demand curve because average revenue (TR ÷ Q) is equal to the price of the good.

  • Define marginal revenue (MR).

    Marginal revenue is the additional revenue gained from selling one more unit of output.

  • True or False?

    If a firm must lower its price to sell more units, its MR curve lies above its AR curve.

    False.

    The MR curve lies below the AR curve, because the price cut applies to all units sold, not just the extra one.

  • Total revenue is maximised when marginal revenue is equal to __.

    Total revenue is maximised when marginal revenue is equal to zero.

  • Define normal profit.

    Normal profit occurs when total revenue equals total cost (TR = TC), so the firm covers all its explicit and implicit costs and earns just enough to remain in the industry.

  • What are implicit costs?

    Implicit costs are the opportunity costs of production.

  • Define supernormal profit.

    Supernormal profit occurs when total revenue exceeds total cost (TR > TC), so the firm earns more than the minimum required to remain in the industry.

  • What effect is supernormal profit likely to have on a market?

    Supernormal profit is likely to attract new entrants into the market.

  • What may happen to a firm that makes a subnormal profit for a sustained period?

    A firm whose losses persist (TR < TC) may exit the market.

  • A firm maximises profit at the level of output where marginal revenue equals ___________.

    A firm maximises profit at the level of output where marginal revenue equals marginal cost.

  • On a cost and revenue diagram, how is the area of supernormal profit measured?

    Supernormal profit is the rectangle whose height is price minus average cost and whose width is the profit-maximising output.

Sign up to unlock flashcards

or