The Circular Flow of Income (A Level) (Cambridge (CIE) A Level Economics): Flashcards

Exam code: 9708

1/57

0Still learning

Know0

  • Why does a rise in an injection raise national income by more than the size of the injection?

Cards in this collection (57)

  • Why does a rise in an injection raise national income by more than the size of the injection?

    A rise in an injection raises national income by more because the initial spending becomes someone else's income and is re-spent in successive rounds.

  • Define the multiplier (k).

    The multiplier (k) is the ratio of the change in equilibrium national income to the initial change in autonomous expenditure that caused it.

  • True or False?

    In the multiplier process, each round of spending is larger than the round before it.

    False.

    Each round of spending is smaller than the last because some income leaks out as savings. The rounds continue until cumulative leakages equal the original injection.

  • What is the difference between an average propensity and a marginal propensity?

    An average propensity is the proportion of total income allocated to a particular use. A marginal propensity is the proportion of any additional income allocated to that use.

  • What is the formula for the marginal propensity to consume (MPC)?

    The MPC is the change in consumption (ΔC) divided by the change in income (ΔY):

    \text{MPC} = \frac{\Delta C}{\Delta Y}

  • True or False?

    The average propensity to consume (APC) always equals the marginal propensity to consume (MPC).

    False.

    Average and marginal values are not the same. The APC tends to fall as income rises because richer households save a larger proportion of their income.

  • What do the four marginal propensities (MPC, MPS, MPM and MRT) always sum to?

    The four marginal propensities always sum to 1, because all additional income is consumed, saved, spent on imports or paid in tax.

  • A ________ is any income not passed on as consumption of domestic output, such as saving, tax and imports.

    A withdrawal is any income not passed on as consumption of domestic output, such as saving, tax and imports.

  • What is the multiplier formula for a closed economy with no government?

    In a closed economy with no government, saving is the only leakage, so:

    k = \frac{1}{\text{MPS}} = \frac{1}{1 - \text{MPC}}

  • If MPS = 0.2, MRT = 0.15 and MPM = 0.15, what is the multiplier in an open economy with a government?

    The multiplier is 2, because 1 is divided by the sum of all three leakages:

    k = 1 ÷ (0.2 + 0.15 + 0.15) = 1 ÷ 0.5 = 2

  • True or False?

    A higher marginal tax rate increases the size of the multiplier.

    False.

    A higher marginal tax rate gives a smaller multiplier, because more income leaks to the government in each round of spending.

  • What is shown on each axis of the 45-degree (income-expenditure) diagram?

    The 45-degree diagram shows national income (Y) on the horizontal axis and aggregate expenditure (AE) on the vertical axis.

  • True or False?

    On the 45-degree diagram, a rise in an injection shifts the AE curve vertically upward by the size of the injection.

    True.

    The vertical shift in AE equals the injection (ΔJ). The resulting horizontal change in income (ΔY) is the multiplied effect.

  • How is the multiplier process shown on an AD/AS diagram?

    The multiplier is shown as two successive rightward shifts of AD: the first from the initial injection, the second from rounds of induced consumer spending.

  • The balance between the output and price effects of the multiplier depends on the ___ of SRAS.

    The balance between the output and price effects of the multiplier depends on the slope of SRAS.

  • If MPS = 0.1, MRT = 0.2 and MPM = 0.1, by how much does national income rise after a $50bn rise in government spending?

    National income rises by $125bn:

    k = 1 ÷ (0.1 + 0.2 + 0.1) = 2.5

    ΔY = 2.5 × $50bn = $125bn

  • Why might a borrowing-financed rise in government spending have a weaker multiplier effect?

    Borrowing may raise interest rates and reduce private investment. This crowding out partially offsets the multiplier.

  • True or False?

    The full multiplier effect on national income happens instantly.

    False.

    The multiplier model ignores time lags. The full effect takes several quarters to work through.

  • Why do small, highly open economies tend to have small multipliers?

    Small open economies have a high marginal propensity to import, so much of any fiscal stimulus leaks abroad and the multiplier is close to 1.

  • Define the reverse multiplier.

    The reverse multiplier is the process by which a fall in an injection, such as exports or investment, reduces national income by a multiple of the initial fall.

  • Why might multipliers be smaller in economies with high public debt?

    Consumers may save extra income in anticipation of future tax rises (Ricardian equivalence), so less is re-spent.

  • What is the identity for aggregate demand (AD)?

    Aggregate demand is the sum of its components:

    AD = C + I + G + (X − M)

  • Define autonomous spending.

    Autonomous spending is spending that is independent of the current level of national income. It occurs even when Y = 0.

  • Define induced spending.

    Induced spending is spending that varies directly with national income, rising as income rises.

  • What is the equation for the consumption function?

    The consumption function is:

    C = a + bY

    Here, a is autonomous consumption, b is the marginal propensity to consume (MPC) and Y is national income.

  • True or False?

    The slope of the consumption function is greater than 1.

    False.

    The slope (the MPC) is positive but less than 1. Each additional unit of income raises consumption by less than one unit.

  • Define the break-even level of income.

    The break-even level of income is the level of income at which consumption exactly equals income and saving is zero.

  • A rise in house or asset prices raises autonomous consumption through the ____ effect.

    A rise in house or asset prices raises autonomous consumption through the wealth effect.

  • Why does redistributing income towards lower-income households raise the aggregate MPC?

    Redistribution raises the aggregate MPC because lower-income households have a higher MPC than higher-income households.

  • What is the equation for the savings function?

    The savings function is:

    S = −a + sY

    Here, −a is autonomous saving and s is the marginal propensity to save (MPS), equal to 1 − b.

  • True or False?

    At incomes below the break-even level, households save part of their income.

    False.

    Below the break-even level, saving is negative. Households dissave to finance consumption that exceeds their income.

  • True or False?

    A rise in interest rates shifts the savings function downward.

    False.

    A rise in interest rates shifts the savings function upward, because it raises the reward for saving.

  • What happens to the savings function when autonomous consumption rises?

    The savings function shifts downward by the same amount, because Y = C + S at every level of income.

  • Investment is the most ______ component of aggregate demand.

    Investment is the most volatile component of aggregate demand.

  • What factors drive autonomous investment?

    Autonomous investment is driven by interest rates, business confidence, technological change and corporate tax rates.

  • What is the equation for induced investment in the accelerator theory?

    The accelerator equation is:

    I = v × ΔY

    Here, v is the accelerator coefficient (the capital-output ratio) and ΔY is the change in national income.

  • True or False?

    Induced investment can fall even while national income is still rising.

    True.

    If national income grows at a slower rate, induced investment falls, even though the economy is still expanding.

  • How do the multiplier and the accelerator interact?

    A rise in autonomous investment raises Y through the multiplier. The rise in Y then induces further investment through the accelerator, which raises Y again.

  • True or False?

    The accelerator link holds even when firms have spare capacity.

    False.

    With spare capacity, firms can meet a rise in Y without new investment, which breaks the accelerator link.

  • Why is government spending largely treated as autonomous at A Level?

    Government spending is treated as autonomous because it is determined by political and policy choices, not by the current level of national income.

  • How does an ageing population affect government spending?

    An ageing population raises government spending on healthcare and pensions.

  • True or False?

    Transfer payments, such as pensions and unemployment benefits, are part of G in the AD equation.

    False.

    Transfer payments are not part of G because they do not directly purchase goods or services. They add to household income and affect AD through consumption.

  • How does a depreciation of the exchange rate affect exports and imports?

    A depreciation makes exports cheaper abroad, raising X, and makes imports more expensive, reducing M.

  • Why are exports largely autonomous with respect to domestic national income?

    Exports are largely autonomous because they depend on foreign national income, not on the level of income at home.

  • Why do imports appear as a leakage in the multiplier formula?

    Imports have a large induced element: higher domestic income raises imports through the marginal propensity to import (MPM).

  • Define equilibrium national income.

    Equilibrium national income is the level of output at which aggregate expenditure equals national income.

  • Define the full employment level of national income.

    The full employment level of national income is the level of output at which all the economy's resources are fully employed, with no cyclical unemployment and no spare capacity.

  • Define a deflationary gap.

    A deflationary gap is the shortfall of aggregate expenditure at full employment income, shown as the vertical distance between the 45° line and the AE curve.

  • Which policies could close a deflationary gap?

    A deflationary gap could be closed by expansionary fiscal policy, expansionary monetary policy or a rise in exports.

  • What does a negative output gap show on an AD/AS diagram?

    A negative output gap shows actual real output below potential output, with short-run equilibrium to the left of the LRAS curve.

  • A negative output gap typically arises when AD falls, for example due to a collapse in consumer ________.

    A negative output gap typically arises when AD falls, for example due to a collapse in consumer confidence.

  • Define an inflationary gap.

    An inflationary gap is the excess of aggregate expenditure over the output the economy can produce at full employment, shown as the vertical distance between the AE curve and the 45° line.

  • In the income-expenditure model, why does an inflationary gap cause demand-pull inflation?

    The economy cannot produce more than full employment output, so excess demand pushes up the average price level rather than raising real output.

  • True or False?

    A positive output gap can be sustained indefinitely.

    False.

    A positive output gap is not sustainable. Rising costs and input shortages push SRAS leftward until the gap is eliminated.

  • According to the Classical view, how does a deflationary gap close?

    The Classical view holds that a deflationary gap closes automatically in the long run as wages and prices fall, restoring full employment output at a lower price level.

  • True or False?

    Keynesians argue that a deflationary gap closes quickly without policy intervention.

    False.

    Keynesians argue that wages and prices are sticky downward, so the economy may stay in a deflationary gap for a long period without active government intervention.

  • Why are output gaps difficult to measure accurately?

    Output gaps are hard to measure because the full employment level of income cannot be directly observed. It must be estimated from indicators such as unemployment, capacity utilisation and inflation.

Sign up to unlock flashcards

or