Reactivity series (Edexcel IGCSE Science (Double Award) (Modular): Chemistry Unit 1): Exam Questions

This question is about metals.

Metals can be arranged in a reactivity series based on their reactions with water and their reactions with dilute hydrochloric acid.

The table shows how four metals, P, Q, R and S, react with water and with dilute hydrochloric acid.

i) Identify which of the metals P, Q, R or S could be gold.

[1]

ii) Suggest why the reaction between metal R and dilute hydrochloric acid was not done.

[1]

iii) Use the information in the table to place the metals in order of reactivity from most reactive to least reactive.

[1]

Zinc is used to coat iron gates to prevent the iron from rusting.

i) State the name of this method of preventing iron from rusting.

[1]

ii) State another method of preventing iron from rusting.

[1]

A mixture of zinc powder and copper(II) oxide is heated.

The chemical equation for the reaction that takes place is

Zn + CuO → ZnO + Cu

i) State how the reaction shows that zinc is more reactive than copper.

[1]

ii) Explain which substance is the oxidising agent.

[2]

A reaction took place between iron sulfate and magnesium. 

iron(II) sulfate + magnesium  →    magnesium sulfate + iron 

Which species has been oxidised?

A metal is added to copper(II) sulfate solution. A displacement reaction only occurs if the metal added is more reactive than copper.

metal + copper(II) sulfate → metal sulfate + copper

Displacement reactions are exothermic. The more reactive the metal added, the greater the temperature rise. A student uses the following method in an experiment to compare the reactivities of different metals:

• Pour some copper(II) sulfate solution into a boiling tube and record its temperature using a thermometer

• Add some metal to the tube and stir with the thermometer

• Record the maximum temperature of the contents of the tube.

He repeats the method using the same amount, in moles, of different metals.

To make the experiment valid, he starts with the copper(II) sulfate solution and the added metal at the same temperature.

State two other variables that must be controlled if the experiment is to be valid.

Another student uses the same method three times for each of the metals E, F, G and H. The table shows her results for these metals.

i) The student calculates the mean temperature increase for metals E and F. She does not include anomalous values in her calculations. Calculate the mean temperature increase for metals G and H, ignoring any anomalous values. Write your answers in the table.

[2]

ii) Explain which metal is the most reactive.

[2]

iii) Explain which metal is less reactive than copper.

[2]

The reactions of metals with water and with dilute sulfuric acid can be used to determine the order of reactivity of the metals.

The table shows the reactions of four metals, W, X, Y and Z, with water and with dilute sulfuric acid.

What is the order of reactivity of these metals, from most reactive to least reactive?

i) State which metal, W, X, Y or Z, could be copper.

[1]

ii) State which metal, W, X, Y or Z, could be magnesium.

[1]

A displacement reaction can also be used to decide the order of reactivity of two metals.

State two observations made when an excess of magnesium powder is added to an aqueous solution of copper(II) sulfate.

The diagram shows two samples of iron, A and B.

Sample B is coated with a thin layer of zinc.

Name the process used to coat iron with zinc.

The two samples of iron are left outside for several weeks.

A brown solid containing hydrated iron(III) oxide forms on sample A.

i) Give the common name for the brown solid.

[1]

ii) Give the names of the two substances that react with the iron to form the brown solid.

[2]

Iron can be formed by reacting aluminium powder with iron(III) oxide. The diagram shows how this reaction can be demonstrated.

When the magnesium fuse is lit, a very exothermic reaction occurs.

i) State the meaning of the term exothermic.

[1]

ii) The equation for the reaction between aluminium and iron(III) oxide is

2Al + Fe₂O₃ → 2Fe + Al₂O₃

Explain what this reaction shows about the relative reactivities of aluminium and iron.

[2]

iii) Explain why the reaction between aluminium and iron(III) oxide is a redox reaction.

[3]

A student uses this method to investigate the reaction of dilute hydrochloric acid with zinc.

• pour some dilute hydrochloric acid into a glass beaker

• record the initial temperature of the acid

• add a piece of zinc and stir the mixture

• record the temperature of the mixture after one minute

Write a word equation for the reaction of dilute hydrochloric acid with zinc.

The diagram shows the thermometer readings for this reaction.

Complete the table, giving all values to the nearest 0.1 °C.

Another student repeats the method using five different metals to compare their reactivity.

i) This student uses a polystyrene cup instead of a glass beaker. Explain why a polystyrene cup is better than a glass beaker in this investigation.

[2]

ii) Give three factors that the student should keep constant in this investigation.

[3]

The table shows some of the student’s results.

i) State why there is no temperature change for copper.

[1]

ii) Predict the temperature change for iron.

[1]

temperature change = ...................................................................... °C

iii) Deduce the order of reactivity of the five metals.

[1]

When iron is left in damp air, rust forms on its surface.

i) State the chemical name for rust.

[1]

ii) Explain how a barrier method prevents rusting.

[2]

A student uses this apparatus to find the approximate percentage by volume of oxygen in air.

This is the student’s method:

• Place a graduated glass tube in a beaker of water

• Place some damp iron wool and a rubber bung in the top of the tube

• Record the reading of the water level in the tube

• Leave the apparatus for a few days

• Record the reading of the water level again

The diagram shows the readings at the start and at the end of the experiment.

i) Use the readings to complete the table, giving all values to the nearest 0.5 cm³

[2]

ii) The student uses these results to calculate the percentage by volume of oxygen in air.

Suggest why her calculated value is lower than the expected value.

[1]

The student repeats the experiment using the same apparatus.

These are her results for the second experiment.

volume of air in tube at start = 80.0 cm³

reading at start = 20.0 cm³

reading at end = 35.5 cm³

Use the results to calculate the percentage by volume of oxygen in air.

percentage = ............................................... %

A student investigates the rusting of iron.

She places an iron nail in a test tube of water and leaves it for several days.

i) Predict the appearance of the iron nail after several days.

[1]

ii) Name the main compound in rust.

[1]

The student then sets up two more test tubes containing iron nails.

Explain why the iron nail in tube 1 and the iron nail in tube 2 do not rust.

A reactivity series can be deduced by observing the reactions of metals with water and sulfuric acid. 

Four metals were added to water and sulfuric acid and the results recorded below. 

What is the order of reactivity starting with the least reactive? 

This question is about rusting.

When iron rusts, it reacts with oxygen in the air.

A student uses the rusting of iron to find the percentage of oxygen in a sample of air.

The diagram shows the apparatus.

These are the student’s results.

volume of air in conical flask and connecting tube = 265 cm³

volume of air in gas syringe at start = 100 cm³

volume of air in gas syringe at end = 25 cm³

Calculate the percentage of oxygen in the sample of air using the student’s results.

percentage of oxygen = .............................................................. %

i) Cars are painted to prevent the iron in car bodies from rusting. Explain how painting prevents the iron in car bodies from rusting.

[2]

ii) Some car manufacturers use paint containing tiny particles of zinc. Explain how particles of zinc prevent iron in car bodies from rusting even when this paint is scratched.

[2]

A displacement reaction occurs between zinc and copper chloride.

Which half equation correctly shows the change that zinc undergoes? 

Manganese is extracted from manganese oxide, MnO₂ , by heating with aluminium powder. Molten manganese and a solid product are formed in this reaction.

Write a balanced symbol equation for this reaction. Include state symbols in your answer.

Use your answer to part a) to write the ionic equation for the reaction of manganese oxide with aluminium powder. You do not need to include state symbols in your answer.

In terms of electrons, explain why this reaction is classed as a redox reaction

Calculate the mass of aluminium that was required to react with manganese oxide, MnO₂, to form 200 g of manganese. 

(A_r: O = 16, Mn = 55, Al = 27)