Alkenes (Cambridge (CIE) O Level Chemistry): Exam Questions

Exam code: 5070

4 hours44 questions
1a
2 marks

The diagram shows how ethene can be made by cracking liquid alkanes.

cracking-lab-exam-image-no-heat

Indicate with arrows on the diagram where heat is applied.

1b
2 marks

Give a chemical test to show the presence of ethene.

test ....................................................................................................

result ....................................................................................................

1c
2 marks

Why must the delivery tube be removed from the water before the heat is turned off?

2a
2 marks

Ethene gas was formed by the cracking of a liquid alkane.

The diagram shows the apparatus used.

A horizontal test tube, closed at the left end. At the closed end is a dark plug labelled liquid alkane on mineral fibre. Further along the tube is a band of granules labelled aluminium oxide. A shaded rectangular block sits at the open mouth of the tube. An arrow labelled very strong heat points upwards at the shaded block. A delivery tube leads from the mouth of the tube to the right, bends downwards and ends inside a rectangular trough, which is drawn with nothing in it. An inverted tube labelled ethene stands over the end of the delivery tube.

Identify two mistakes in the diagram.

2b
2 marks

Describe a test to show the presence of ethene.

test ....................................................................................................

result ....................................................................................................

3a
1 mark

A liquid alkane was passed over heated aluminium oxide to make ethene.

cracking

What is the purpose of the mineral wool?

3b
1 mark

What is this type of chemical reaction called?

3c
2 marks

Give a test for ethene. test ..................................................................................... result ..................................................................................

3d
2 marks

What precaution should be taken in the experiment when the heat is removed? Explain.

4a
2 marks

A liquid alkane is passed over heated aluminium oxide to make ethene.

Apparatus for cracking a liquid alkane. A horizontal test tube, closed at the left end, holds liquid alkane on mineral wool at the closed end and lumps of aluminium oxide further along. A bung closes the open end. Two arrows labelled very strong heat point at the liquid alkane and mineral wool and at the aluminium oxide. A delivery tube runs from the bung down into a trough of water and ends under an inverted tube labelled ethene, in which gas collects over water.

A student measures how the volume of gas collected changes with time.

State the independent variable and the dependent variable in this investigation.

4b
1 mark

Suggest why the first gas to be collected should not be used to test for ethene.

4c
2 marks

State one hazard in this experiment.

Give a precaution that reduces the risk from it.

4d
1 mark

State the purpose of the aluminium oxide.

5a
2 marks

A liquid alkane is passed over heated aluminium oxide to make ethene.

Apparatus for cracking a liquid alkane. A horizontal test tube, closed at the left end, holds liquid alkane on mineral wool at the closed end and lumps of aluminium oxide further along. A bung closes the open end. Two arrows labelled very strong heat point at the liquid alkane and mineral wool and at the aluminium oxide. A delivery tube runs from the bung down into a trough of water and ends under an inverted tube labelled ethene, in which gas collects over water.

The gas is collected in a tube over water.

Name a piece of apparatus that would measure the volume of gas produced more precisely.

Justify your choice.

5b
2 marks

The aluminium oxide is heated strongly before the liquid alkane is warmed.

Explain why.

5c
2 marks

The volume of gas collected is smaller than the student expected.

Suggest two reasons for this, other than the reaction being incomplete.

5d
1 mark

The tube holding the liquid alkane is clamped horizontally.

Suggest why the tube must not slope downwards from its closed end towards its open end.