Ideal Gas Law & Solutions (College Board AP® Chemistry): Study Guide

Martín

Written by: Martín

Reviewed by: Stewart Hird

Updated on

Calculations of gases & solutions

Calculations with ideal gases

  • When a gas is a reactant or product, its amount in moles can be found from P, V and T with the ideal gas law

  • Treat the gases as ideal gases, so the ideal gas law (PV = nRT) applies

  • The ideal gas equation connects the pressure (P), volume (V) and temperature (T) of an ideal gas with the amount of moles (n)

    • The equation is shown below:

 PV = nRT

  • The gas constant (R) can adopt different values depending on the units used for pressure, volume and temperature

    • R = 8.314 J mol-1 K-1 = 0.08206 L atm mol-1 K-1

    • Use 0.08206 L atm mol-1 K-1 with pressure in atm and volume in L

    • Convert torr or mm Hg to atm first (760 torr = 1 atm)

  • Both values are given in the equations and constants reference available in the exam

Worked Example

The reaction of calcium carbonate (CaCO3) and hydrochloric acid (HCl) produces calcium chloride (CaCl2), water (H2O), and carbon dioxide gas (CO2). The reaction takes place at 1.02 atm and 27.0 °C. How many liters of carbon dioxide are released when 50.0 g of calcium carbonate reacts with excess hydrochloric acid?

Answer:

Step 1: Write a balanced equation for the chemical reaction

CaCO3 + HCl → CaCl2 +H2O + CO2

  • Balance Cl

CaCO3 + 2HCl → CaCl2 +H2O + CO2

 

Left

Right

Ca

1

1

C

1

1

O

3

3

H

2

2

Cl

2

2

  •  The equation is balanced

Step 2: Analyze the statement and set up the steps that you are going to use to solve the problem. The initial quantity is always given by the statement

Flow chart: mass of CaCO3 to moles of CaCO3 using n = m over M; to moles of CO2 using 1 mol CO2 over 1 mol CaCO3; to liters of CO2 using PV = nRT, with T = 27 degrees Celsius, P = 1.02 atm and R = 0.08206 liter atmospheres per mole per kelvin

Step 3: Calculate the moles of calcium carbonate using its mass and molar mass

M = molar mass of CaCO3

M = (1 × mass of Ca) + (1 × mass of C) + (3 × mass of O)

M = (1 × 40.08) + (1 × 12.01) + (3 × 16.00)

M = 100.09 g/mol

n = m/M

n = 50.0 g ÷ 100.09 g/mol

n = 0.49955 mol of CaCO3

Step 4: Calculate the moles of carbon dioxide using the ratio from the chemical equation

0.49955 mol of CaCO3 ×1 mol of CO21 mol of CaCO3= 0.49955 mol of CO2

  • Since the ratio is 1:1 the moles of carbon dioxide must be the same

Step 5: Calculate the liters of carbon dioxide using the ideal gas equation

PV = nRT

  • Since the answer must be in liters, R = 0.08206 L atm mol-1 K-1 

  • The pressure and temperature are given by the statement: 1.02 atm and 27.0 ℃ respectively

  • When working with the ideal gas equation, temperature must be in Kelvin. Therefore,

T (K) = T (°C) + 273.15

T = 27.0 + 273.15

T = 300.2 K

  • With the temperature in kelvins and the pressure in atm, apply the ideal gas equation

PV = nRT

  • Rearrange the equation

V = nRTP

  • Replace the variables by the quantities given by the statement,

V = (0.49955 mol)(0.08206 L atm mol−1 K−1)(300.2 K)1.02 atm

V = 12.06 L

Step 6: All the data are given to 3 significant figures, so give the answer to 3 significant figures

  • The volume of carbon dioxide produced is 12.1 L

Calculations with solutions

  • There are a lot of chemical reactions between solutions

    • A solution is a homogeneous mixture of a solute (the substance present in the smaller amount) dissolved in a solvent (the substance present in the larger amount)

    • Solutions can be solids, liquids or gases

    • In most reactions in AP Chemistry the solvent is water (an aqueous solution)

  • The amount of moles that are involved in the reaction depends on the concentration of the solution and its volume

  • Molarity (M) is used to quantify the concentration, and it connects the moles of solute (n) and the volume of solution in liters (V)

M = n of soluteV of solution in liters

  • Volumes in molarity calculations must be in liters

    • 1 L = 1000 mL

Worked Example

What volume, in liters, of 0.100 M KCl solution reacts completely with 0.200 L of 0.200 M Pb(NO3)2 solution?

2KCl (aq) + Pb(NO3)2 (aq) → PbCl2 (s) + 2KNO3 (aq)

Answer:

Step 1: Analyze the statement and set up the steps that you are going to use to solve the problem.

  • Volume and molarity are both given for Pb(NO3)2, so start there

Flow chart: liters of Pb(NO3)2 to moles of Pb(NO3)2 using M = n over V; to moles of KCl using 2 mol KCl over 1 mol Pb(NO3)2; to liters of KCl using M = n over V

Step 2: Calculate the moles of Pb(NO3)2 using the molarity equation

M = n of soluteV of solution in liters

  • Rearranging the equation,

n of solute = M × V of solution in liters

  • Replacing the values,

n of solute = 0.200 M × 0.200 L

n of solute = 0.0400 mol of Pb(NO3)2

Step 3: Calculate the moles of KCl that reacted using the ratio from the chemical equation

0.0400 mol of Pb(NO3)2 × 2 mol of KCl1 mol of Pb(NO3)2 = 0.0800 mol of KCl

  • Since the ratio is 1:2 the moles of KCl must be double

Step 4: Calculate the volume in L of KCl solution that is needed to react completely

M = n of soluteV of solution in liters

  • Rearranging the equation,

V of solution in liters = n of soluteM

  • Replacing the values,

V of solution in liters = 0.0800 mol of KCl0.100 M

V of solution in liters = 0.800 L

Step 5: All the data are given to 3 significant figures, so give the answer to 3 significant figures

  • The volume of KCl solution required to react completely with the Pb(NO3)2 solution is 0.800 L

Examiner Tips and Tricks

Some key points noted by readers:

  • Moles of solute = molarity × volume in liters. You need both quantities, and you multiply them

  • Convert mL to L before you use molarity

  • Moles (mol) and molarity (M) are different quantities: label each value with its unit

Unlock more, it's free!

Join the 100,000+ Students that ❤️ Save My Exams

the (exam) results speak for themselves:

Build on this topic

Martín

Author: Martín

Expertise: Chemistry Content Creator

Martín, a dedicated chemistry teacher and tutor, excels in guiding students through IB, AP, and IGCSE Chemistry. As an IB Chemistry student, he came from hands-on preparation, focusing on practical exam techniques and rigorous practice. While at Universidad San Francisco de Quito, his academic journey sparked a passion for computational and physical chemistry. Martín specializes in chemistry, and he knows that SaveMyExams is the right place if he wants to have a positive impact all around the world.

Stewart Hird

Reviewer: Stewart Hird

Expertise: Chemistry Content Creator

Stewart has been an enthusiastic GCSE, IGCSE, A Level and IB teacher for more than 30 years in the UK as well as overseas, and has also been an examiner for IB and A Level. As a long-standing Head of Science, Stewart brings a wealth of experience to creating Topic Questions and revision materials for Save My Exams. Stewart specialises in Chemistry, but has also taught Physics and Environmental Systems and Societies.